Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures

Ibai Ojeda; Ignacio Laraudogoitia; Mario Renderos; Edurne Iriondo; Unai Alonso; Franck Girot

doi:10.1007/978-3-031-51623-8_70

Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures

Ibai Ojeda^*
, Ignacio Laraudogoitia
, Mario Renderos
, Edurne Iriondo
, Unai Alonso
, Franck Girot

^*Corresponding author for this work

Alloys, products and metal circularity

Escuela de Ingeniería de Bilbao

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This contribution discusses the lack of modernization and automation in the tools used for assembling structures in the aeronautical industry, which is a disadvantage for the Basque industry's competitiveness. The paper suggests that significant innovation in these tools will result in savings in their development and subsequent maintenance during the production phase. To achieve this goal, the paper proposes the development of flexible and reconfigurable “fixtures” or columns, which can be used to manufacture large aerostructural components. The pa-per outlines specific requirements and needs for the structural design, such as flexibility, reusability, and rigidity. The paper also discusses the integration of the structure with robotics for automation and suggests that the new tool design should be prepared to integrate robotic applications for automated drilling and riveting. The ultimate goal is to differentiate Basque companies from others in the aeronautical industry and position the Spanish aeronautical sector in the international market by taking advantage of this innovative approach.

Original language	English
Title of host publication	Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference
Editors	Cristina Manchado del Val, Miguel Suffo Pino, Daniel Moreno Sánchez, Daniel Moreno Nieto, Ramón Miralbes Buil
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	711-721
Number of pages	11
ISBN (Print)	9783031516221
DOIs	https://doi.org/10.1007/978-3-031-51623-8_70
Publication status	Published - 2024
Event	32nd International conference on The Digital Transformation in the Graphic Engineering, INGEGRAF 2023 - Cádiz, Spain Duration: 21 Jun 2023 → 23 Jun 2023

Publication series

Name	Lecture Notes in Mechanical Engineering
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Conference

Conference	32nd International conference on The Digital Transformation in the Graphic Engineering, INGEGRAF 2023
Country/Territory	Spain
City	Cádiz
Period	21/06/23 → 23/06/23

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Aeronautical Industry
Assembly
Competitiveness
Flexible tooling
Robotics integra-tion

Access to Document

10.1007/978-3-031-51623-8_70

Cite this

Ojeda, I., Laraudogoitia, I., Renderos, M., Iriondo, E., Alonso, U., & Girot, F. (2024). Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures. In C. Manchado del Val, M. Suffo Pino, D. Moreno Sánchez, D. Moreno Nieto, & R. Miralbes Buil (Eds.), Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference (pp. 711-721). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-51623-8_70

Ojeda, Ibai ; Laraudogoitia, Ignacio ; Renderos, Mario et al. / Advanced Solutions for Flexible Tools for Air-Craft Assembly : Lattice or Reticular Structures. Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference. editor / Cristina Manchado del Val ; Miguel Suffo Pino ; Daniel Moreno Sánchez ; Daniel Moreno Nieto ; Ramón Miralbes Buil. Springer Science and Business Media Deutschland GmbH, 2024. pp. 711-721 (Lecture Notes in Mechanical Engineering).

@inproceedings{560699cce61e4ad98a19c80aec60f0df,

title = "Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures",

abstract = "This contribution discusses the lack of modernization and automation in the tools used for assembling structures in the aeronautical industry, which is a disadvantage for the Basque industry's competitiveness. The paper suggests that significant innovation in these tools will result in savings in their development and subsequent maintenance during the production phase. To achieve this goal, the paper proposes the development of flexible and reconfigurable “fixtures” or columns, which can be used to manufacture large aerostructural components. The pa-per outlines specific requirements and needs for the structural design, such as flexibility, reusability, and rigidity. The paper also discusses the integration of the structure with robotics for automation and suggests that the new tool design should be prepared to integrate robotic applications for automated drilling and riveting. The ultimate goal is to differentiate Basque companies from others in the aeronautical industry and position the Spanish aeronautical sector in the international market by taking advantage of this innovative approach.",

keywords = "Aeronautical Industry, Assembly, Competitiveness, Flexible tooling, Robotics integra-tion",

author = "Ibai Ojeda and Ignacio Laraudogoitia and Mario Renderos and Edurne Iriondo and Unai Alonso and Franck Girot",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.; 32nd International conference on The Digital Transformation in the Graphic Engineering, INGEGRAF 2023 ; Conference date: 21-06-2023 Through 23-06-2023",

year = "2024",

doi = "10.1007/978-3-031-51623-8\_70",

language = "English",

isbn = "9783031516221",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "711--721",

editor = "\{Manchado del Val\}, Cristina and \{Suffo Pino\}, Miguel and \{Moreno S{\'a}nchez\}, Daniel and \{Moreno Nieto\}, Daniel and \{Miralbes Buil\}, Ram{\'o}n",

booktitle = "Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference",

address = "Germany",

}

Ojeda, I, Laraudogoitia, I, Renderos, M, Iriondo, E, Alonso, U & Girot, F 2024, Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures. in C Manchado del Val, M Suffo Pino, D Moreno Sánchez, D Moreno Nieto & R Miralbes Buil (eds), Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, pp. 711-721, 32nd International conference on The Digital Transformation in the Graphic Engineering, INGEGRAF 2023, Cádiz, Spain, 21/06/23. https://doi.org/10.1007/978-3-031-51623-8_70

Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures. / Ojeda, Ibai; Laraudogoitia, Ignacio; Renderos, Mario et al.
Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference. ed. / Cristina Manchado del Val; Miguel Suffo Pino; Daniel Moreno Sánchez; Daniel Moreno Nieto; Ramón Miralbes Buil. Springer Science and Business Media Deutschland GmbH, 2024. p. 711-721 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Advanced Solutions for Flexible Tools for Air-Craft Assembly

T2 - 32nd International conference on The Digital Transformation in the Graphic Engineering, INGEGRAF 2023

AU - Ojeda, Ibai

AU - Laraudogoitia, Ignacio

AU - Renderos, Mario

AU - Iriondo, Edurne

AU - Alonso, Unai

AU - Girot, Franck

N1 - Publisher Copyright: © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.

PY - 2024

Y1 - 2024

N2 - This contribution discusses the lack of modernization and automation in the tools used for assembling structures in the aeronautical industry, which is a disadvantage for the Basque industry's competitiveness. The paper suggests that significant innovation in these tools will result in savings in their development and subsequent maintenance during the production phase. To achieve this goal, the paper proposes the development of flexible and reconfigurable “fixtures” or columns, which can be used to manufacture large aerostructural components. The pa-per outlines specific requirements and needs for the structural design, such as flexibility, reusability, and rigidity. The paper also discusses the integration of the structure with robotics for automation and suggests that the new tool design should be prepared to integrate robotic applications for automated drilling and riveting. The ultimate goal is to differentiate Basque companies from others in the aeronautical industry and position the Spanish aeronautical sector in the international market by taking advantage of this innovative approach.

AB - This contribution discusses the lack of modernization and automation in the tools used for assembling structures in the aeronautical industry, which is a disadvantage for the Basque industry's competitiveness. The paper suggests that significant innovation in these tools will result in savings in their development and subsequent maintenance during the production phase. To achieve this goal, the paper proposes the development of flexible and reconfigurable “fixtures” or columns, which can be used to manufacture large aerostructural components. The pa-per outlines specific requirements and needs for the structural design, such as flexibility, reusability, and rigidity. The paper also discusses the integration of the structure with robotics for automation and suggests that the new tool design should be prepared to integrate robotic applications for automated drilling and riveting. The ultimate goal is to differentiate Basque companies from others in the aeronautical industry and position the Spanish aeronautical sector in the international market by taking advantage of this innovative approach.

KW - Aeronautical Industry

KW - Assembly

KW - Competitiveness

KW - Flexible tooling

KW - Robotics integra-tion

UR - https://www.scopus.com/pages/publications/85192191871

U2 - 10.1007/978-3-031-51623-8_70

DO - 10.1007/978-3-031-51623-8_70

M3 - Conference contribution

AN - SCOPUS:85192191871

SN - 9783031516221

T3 - Lecture Notes in Mechanical Engineering

SP - 711

EP - 721

BT - Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference

A2 - Manchado del Val, Cristina

A2 - Suffo Pino, Miguel

A2 - Moreno Sánchez, Daniel

A2 - Moreno Nieto, Daniel

A2 - Miralbes Buil, Ramón

PB - Springer Science and Business Media Deutschland GmbH

Y2 - 21 June 2023 through 23 June 2023

ER -

Ojeda I, Laraudogoitia I, Renderos M, Iriondo E, Alonso U, Girot F. Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures. In Manchado del Val C, Suffo Pino M, Moreno Sánchez D, Moreno Nieto D, Miralbes Buil R, editors, Advances in Design Engineering IV - Proceedings of the XXXII INGEGRAF International Conference. Springer Science and Business Media Deutschland GmbH. 2024. p. 711-721. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-031-51623-8_70

Advanced Solutions for Flexible Tools for Air-Craft Assembly: Lattice or Reticular Structures

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this