An experimental study about the utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensors

Francisco J. Arregui; Mikel Otano; Carlos Fernandez-Valdivielso; Ignacio R. Matias

doi:10.1016/S0925-4005(02)00248-4

An experimental study about the utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensors

Francisco J. Arregui^*
, Mikel Otano
, Carlos Fernandez-Valdivielso
, Ignacio R. Matias

^*Corresponding author for this work

Public University of Navarre

Research output: Contribution to journal › Article › peer-review

48 Citations (Scopus)

Abstract

The utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensor was discussed. These sensors were found to work in the whole acid range (pH 1 to 6) with a response time of less than 90 s with stability and repeatibility. The analysis suggested the usefulness of Liquicoat® coatings for the fabrication of optical fiber sensors for the measurement of chemical parameters.

Original language	English
Pages (from-to)	289-295
Number of pages	7
Journal	Sensors and Actuators B: Chemical
Volume	87
Issue number	2
DOIs	https://doi.org/10.1016/S0925-4005(02)00248-4
Publication status	Published - 10 Dec 2002
Externally published	Yes

Keywords

Optical fiber
PH sensor
Sol-gel

Access to Document

10.1016/S0925-4005(02)00248-4

Cite this

@article{b73853c45db44dcf8fe0325a8e4b8cfe,

title = "An experimental study about the utilization of Liquicoat{\textregistered} solutions for the fabrication of pH optical fiber sensors",

abstract = "The utilization of Liquicoat{\textregistered} solutions for the fabrication of pH optical fiber sensor was discussed. These sensors were found to work in the whole acid range (pH 1 to 6) with a response time of less than 90 s with stability and repeatibility. The analysis suggested the usefulness of Liquicoat{\textregistered} coatings for the fabrication of optical fiber sensors for the measurement of chemical parameters.",

keywords = "Optical fiber, PH sensor, Sol-gel",

author = "Arregui, \{Francisco J.\} and Mikel Otano and Carlos Fernandez-Valdivielso and Matias, \{Ignacio R.\}",

year = "2002",

month = dec,

day = "10",

doi = "10.1016/S0925-4005(02)00248-4",

language = "English",

volume = "87",

pages = "289--295",

journal = "Sensors and Actuators B: Chemical",

issn = "0925-4005",

publisher = "Elsevier",

number = "2",

}

TY - JOUR

T1 - An experimental study about the utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensors

AU - Arregui, Francisco J.

AU - Otano, Mikel

AU - Fernandez-Valdivielso, Carlos

AU - Matias, Ignacio R.

PY - 2002/12/10

Y1 - 2002/12/10

N2 - The utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensor was discussed. These sensors were found to work in the whole acid range (pH 1 to 6) with a response time of less than 90 s with stability and repeatibility. The analysis suggested the usefulness of Liquicoat® coatings for the fabrication of optical fiber sensors for the measurement of chemical parameters.

AB - The utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensor was discussed. These sensors were found to work in the whole acid range (pH 1 to 6) with a response time of less than 90 s with stability and repeatibility. The analysis suggested the usefulness of Liquicoat® coatings for the fabrication of optical fiber sensors for the measurement of chemical parameters.

KW - Optical fiber

KW - PH sensor

KW - Sol-gel

UR - https://www.scopus.com/pages/publications/0037058620

U2 - 10.1016/S0925-4005(02)00248-4

DO - 10.1016/S0925-4005(02)00248-4

M3 - Article

AN - SCOPUS:0037058620

SN - 0925-4005

VL - 87

SP - 289

EP - 295

JO - Sensors and Actuators B: Chemical

JF - Sensors and Actuators B: Chemical

IS - 2

ER -

An experimental study about the utilization of Liquicoat® solutions for the fabrication of pH optical fiber sensors

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this