Calibration procedures for multidimensional heat transfer models based on on-site experimental data

Roberto Garay; Amaia Uriarte; Inés Apraiz; Roberto Garay Martinez; Amaia Uriarte Arrien; Ines Apraiz Egaña

doi:10.1016/j.egypro.2015.11.784

Calibration procedures for multidimensional heat transfer models based on on-site experimental data

Roberto Garay, Amaia Uriarte, Inés Apraiz, Roberto Garay Martinez, Amaia Uriarte Arrien, Ines Apraiz Egaña

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

1 Downloads (Pure)

Abstract

An experimental and numerical approach to the characterization of thermal bridges is presented, based on on-site taken measurements. Commonly on-site applied numerical thermal assessments perform one-dimensional heat transfer analysis over planar elements such as facades. However, it is well known that within thermal bridges in a building one-dimensional heat transfer analysis cannot be applied. A procedure is proposed, based on the creation of a numerical 2D thermal model which is calibrated against experimental data from several temperature and heat flux sensors which are located at specific points in the thermal bridge elements. Results of one particular implementation of this method are discussed.

Original language	English
Pages (from-to)	3222-3227
Number of pages	6
Journal	unknown
Volume	unknown
DOIs	https://doi.org/10.1016/j.egypro.2015.11.784
Publication status	Published - 1 Nov 2015
Event	6th International Building Physics Conference, IBPC 2015 - Torino, Italy Duration: 14 Jun 2015 → 17 Jun 2015

Keywords

Thermal bridge
Calibration
Heat transfer
Multidimensional
2-D model
Experimentation

Access to Document

10.1016/j.egypro.2015.11.784

IBPC 109 20151116Final published version, 543 KB

Cite this

@article{94b33797866c4e9ab000cfc3f41d6b70,

title = "Calibration procedures for multidimensional heat transfer models based on on-site experimental data",

abstract = "An experimental and numerical approach to the characterization of thermal bridges is presented, based on on-site taken measurements. Commonly on-site applied numerical thermal assessments perform one-dimensional heat transfer analysis over planar elements such as facades. However, it is well known that within thermal bridges in a building one-dimensional heat transfer analysis cannot be applied. A procedure is proposed, based on the creation of a numerical 2D thermal model which is calibrated against experimental data from several temperature and heat flux sensors which are located at specific points in the thermal bridge elements. Results of one particular implementation of this method are discussed.",

keywords = "Thermal bridge, Calibration, Heat transfer, Multidimensional, 2-D model, Experimentation, Thermal bridge, Calibration, Heat transfer, Multidimensional, 2-D model, Experimentation",

author = "Roberto Garay and Amaia Uriarte and In{\'e}s Apraiz and Martinez, {Roberto Garay} and Arrien, {Amaia Uriarte} and Ega{\~n}a, {Ines Apraiz}",

note = "Publisher Copyright: {\textcopyright} 2015 The Authors.; 6th International Building Physics Conference, IBPC 2015 ; Conference date: 14-06-2015 Through 17-06-2015",

year = "2015",

month = nov,

day = "1",

doi = "10.1016/j.egypro.2015.11.784",

language = "English",

volume = "unknown",

pages = "3222--3227",

journal = "unknown",

}

TY - JOUR

T1 - Calibration procedures for multidimensional heat transfer models based on on-site experimental data

AU - Garay, Roberto

AU - Uriarte, Amaia

AU - Apraiz, Inés

AU - Martinez, Roberto Garay

AU - Arrien, Amaia Uriarte

AU - Egaña, Ines Apraiz

PY - 2015/11/1

Y1 - 2015/11/1

N2 - An experimental and numerical approach to the characterization of thermal bridges is presented, based on on-site taken measurements. Commonly on-site applied numerical thermal assessments perform one-dimensional heat transfer analysis over planar elements such as facades. However, it is well known that within thermal bridges in a building one-dimensional heat transfer analysis cannot be applied. A procedure is proposed, based on the creation of a numerical 2D thermal model which is calibrated against experimental data from several temperature and heat flux sensors which are located at specific points in the thermal bridge elements. Results of one particular implementation of this method are discussed.

AB - An experimental and numerical approach to the characterization of thermal bridges is presented, based on on-site taken measurements. Commonly on-site applied numerical thermal assessments perform one-dimensional heat transfer analysis over planar elements such as facades. However, it is well known that within thermal bridges in a building one-dimensional heat transfer analysis cannot be applied. A procedure is proposed, based on the creation of a numerical 2D thermal model which is calibrated against experimental data from several temperature and heat flux sensors which are located at specific points in the thermal bridge elements. Results of one particular implementation of this method are discussed.

KW - Thermal bridge

KW - Calibration

KW - Heat transfer

KW - Multidimensional

KW - 2-D model

KW - Experimentation

KW - Thermal bridge

KW - Calibration

KW - Heat transfer

KW - Multidimensional

KW - 2-D model

KW - Experimentation

UR - http://www.scopus.com/inward/record.url?scp=84962570276&partnerID=8YFLogxK

U2 - 10.1016/j.egypro.2015.11.784

DO - 10.1016/j.egypro.2015.11.784

M3 - Conference article

VL - unknown

SP - 3222

EP - 3227

JO - unknown

JF - unknown

T2 - 6th International Building Physics Conference, IBPC 2015

Y2 - 14 June 2015 through 17 June 2015

ER -

Calibration procedures for multidimensional heat transfer models based on on-site experimental data

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this