TY - JOUR
T1 - Composition engineering of ultra-soft-magnetic Co-based alloys
AU - Ahmadian Baghbaderani, Hasan
AU - Masood, Ansar
AU - Alvarez, Kenny L.
AU - Lordan, Daniel
AU - Venkatesan, M.
AU - Mathúna, Cian
AU - McCloskey, Paul
AU - Stamenov, Plamen
N1 - Publisher Copyright:
© 2022 Elsevier B.V.
PY - 2022/11/30
Y1 - 2022/11/30
N2 - In the present study, the liquidus temperature, mixing enthalpy, and atomic mismatch factor are used to predict and empirically evaluate the amorphisation capability of Co-Fe-B alloys fabricated by melt spinning. Based on this approach, five out of seven alloys have an amorphous structure, confirming the capability of the proposed model in predicting the alloy compositions with higher amorphisation ability in a ternary alloy system in the absence of any costly elements, such as Nb, Mo and Zr. X-ray diffraction, TEM and Mössbauer results show that the other two alloys exhibit different in-situ crystallisation behaviour. In one case, only the free-side crystallises, whereas the crystallisation occurs through the entire thickness of the ribbon in the other alloy. The lower amorphisation ability exhibited by these alloys in relation to the predictive parameters has been evaluated. Additionally, there is a strong correlation between amorphisation ability and crystallisation behaviour of alloys. Alloys, which crystallise through eutectic mode, are more likely to exhibit high amorphisation capability, whereas crystallisation via the primary mechanism can be the sign of lower amorphisation ability. The output of the alloy design process is five amorphous compositions, among which one is magnetically ultra-soft, Hc = 2.9 A/m; a surface crystalline alloy, with a low coercivity and higher value of anisotropy field compared to amorphous samples; and a nanocrystalline sample with a very high saturation flux density, Bs = 1.57 T. The surface crystallisation can eliminate the need for inducing transverse anisotropy by magnetic annealing. Therefore, optimising the alloy composition through this method can be a universal strategy of composition design for the fabrication of alloys with excellent properties, to be utilised in both high-Bs and low-Hc applications.
AB - In the present study, the liquidus temperature, mixing enthalpy, and atomic mismatch factor are used to predict and empirically evaluate the amorphisation capability of Co-Fe-B alloys fabricated by melt spinning. Based on this approach, five out of seven alloys have an amorphous structure, confirming the capability of the proposed model in predicting the alloy compositions with higher amorphisation ability in a ternary alloy system in the absence of any costly elements, such as Nb, Mo and Zr. X-ray diffraction, TEM and Mössbauer results show that the other two alloys exhibit different in-situ crystallisation behaviour. In one case, only the free-side crystallises, whereas the crystallisation occurs through the entire thickness of the ribbon in the other alloy. The lower amorphisation ability exhibited by these alloys in relation to the predictive parameters has been evaluated. Additionally, there is a strong correlation between amorphisation ability and crystallisation behaviour of alloys. Alloys, which crystallise through eutectic mode, are more likely to exhibit high amorphisation capability, whereas crystallisation via the primary mechanism can be the sign of lower amorphisation ability. The output of the alloy design process is five amorphous compositions, among which one is magnetically ultra-soft, Hc = 2.9 A/m; a surface crystalline alloy, with a low coercivity and higher value of anisotropy field compared to amorphous samples; and a nanocrystalline sample with a very high saturation flux density, Bs = 1.57 T. The surface crystallisation can eliminate the need for inducing transverse anisotropy by magnetic annealing. Therefore, optimising the alloy composition through this method can be a universal strategy of composition design for the fabrication of alloys with excellent properties, to be utilised in both high-Bs and low-Hc applications.
KW - Alloy design
KW - Amorphisation capability
KW - CALPHAD
KW - Mössbauer studies
KW - Nanostructured alloys
KW - Rapid quenching
KW - Soft magnetic properties
UR - http://www.scopus.com/inward/record.url?scp=85135389174&partnerID=8YFLogxK
U2 - 10.1016/j.jallcom.2022.166366
DO - 10.1016/j.jallcom.2022.166366
M3 - Article
AN - SCOPUS:85135389174
SN - 0925-8388
VL - 924
JO - Journal of Alloys and Compounds
JF - Journal of Alloys and Compounds
M1 - 166366
ER -