Development of porous metal supports for H2 separation membranes: Surface modification

I. Agote; M. A. Lagos; E. Fernández; J. A. Calero

Development of porous metal supports for H2 separation membranes: Surface modification

AMES

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Porous metal supports are critical for the manufacturing of hydrogen separation membranes. An adequate support allows depositing a minimum Pd coating which in the end will result in better membrane performance. The surface of the support and in particular the pore size is of prime importance. This work studies the development of metal supports, 316L stainless steel with controlled pore size. To this end secondary surface modification by means of mechanical process and chemical etching was carried out to adapt the pore size to the needs of the application. It was found that the surface (pore size and roughness) can be strongly modified by the variation of the previously mentioned parameters and secondary processes. Pore sizes below 5 microns can be obtained and thus effectively used for membrane manufacturing. Finally, a membrane with 7 microns of continuous Palladium layer has been successfully obtained.

Original language	English
Title of host publication	PM Applications and New Processes
Publisher	European Powder Metallurgy Association (EPMA)
ISBN (Print)	9781899072361
Publication status	Published - 2012
Event	European International Powder Metallurgy Congress and Exhibition, Euro PM 2012 - Basel, Switzerland Duration: 16 Sept 2012 → 19 Sept 2012

Publication series

Name	Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012
Volume	1

Conference

Conference	European International Powder Metallurgy Congress and Exhibition, Euro PM 2012
Country/Territory	Switzerland
City	Basel
Period	16/09/12 → 19/09/12

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Cite this

@inproceedings{cfc1ced4d5714a469d984d988e0881d0,

title = "Development of porous metal supports for H2 separation membranes: Surface modification",

abstract = "Porous metal supports are critical for the manufacturing of hydrogen separation membranes. An adequate support allows depositing a minimum Pd coating which in the end will result in better membrane performance. The surface of the support and in particular the pore size is of prime importance. This work studies the development of metal supports, 316L stainless steel with controlled pore size. To this end secondary surface modification by means of mechanical process and chemical etching was carried out to adapt the pore size to the needs of the application. It was found that the surface (pore size and roughness) can be strongly modified by the variation of the previously mentioned parameters and secondary processes. Pore sizes below 5 microns can be obtained and thus effectively used for membrane manufacturing. Finally, a membrane with 7 microns of continuous Palladium layer has been successfully obtained.",

author = "I. Agote and Lagos, \{M. A.\} and E. Fern{\'a}ndez and Calero, \{J. A.\}",

year = "2012",

language = "English",

isbn = "9781899072361",

series = "Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012",

publisher = "European Powder Metallurgy Association (EPMA)",

booktitle = "PM Applications and New Processes",

note = "European International Powder Metallurgy Congress and Exhibition, Euro PM 2012 ; Conference date: 16-09-2012 Through 19-09-2012",

}

Agote, I , Lagos, MA , Fernández, E & Calero, JA 2012, Development of porous metal supports for H2 separation membranes: Surface modification. in PM Applications and New Processes. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012, vol. 1, European Powder Metallurgy Association (EPMA), European International Powder Metallurgy Congress and Exhibition, Euro PM 2012, Basel, Switzerland, 16/09/12.

Development of porous metal supports for H2 separation membranes: Surface modification. / Agote, I.; Lagos, M. A.; Fernández, E. et al.
PM Applications and New Processes. European Powder Metallurgy Association (EPMA), 2012. (Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Development of porous metal supports for H2 separation membranes

T2 - European International Powder Metallurgy Congress and Exhibition, Euro PM 2012

AU - Agote, I.

AU - Lagos, M. A.

AU - Fernández, E.

AU - Calero, J. A.

PY - 2012

Y1 - 2012

N2 - Porous metal supports are critical for the manufacturing of hydrogen separation membranes. An adequate support allows depositing a minimum Pd coating which in the end will result in better membrane performance. The surface of the support and in particular the pore size is of prime importance. This work studies the development of metal supports, 316L stainless steel with controlled pore size. To this end secondary surface modification by means of mechanical process and chemical etching was carried out to adapt the pore size to the needs of the application. It was found that the surface (pore size and roughness) can be strongly modified by the variation of the previously mentioned parameters and secondary processes. Pore sizes below 5 microns can be obtained and thus effectively used for membrane manufacturing. Finally, a membrane with 7 microns of continuous Palladium layer has been successfully obtained.

AB - Porous metal supports are critical for the manufacturing of hydrogen separation membranes. An adequate support allows depositing a minimum Pd coating which in the end will result in better membrane performance. The surface of the support and in particular the pore size is of prime importance. This work studies the development of metal supports, 316L stainless steel with controlled pore size. To this end secondary surface modification by means of mechanical process and chemical etching was carried out to adapt the pore size to the needs of the application. It was found that the surface (pore size and roughness) can be strongly modified by the variation of the previously mentioned parameters and secondary processes. Pore sizes below 5 microns can be obtained and thus effectively used for membrane manufacturing. Finally, a membrane with 7 microns of continuous Palladium layer has been successfully obtained.

UR - https://www.scopus.com/pages/publications/84902352781

M3 - Conference contribution

AN - SCOPUS:84902352781

SN - 9781899072361

T3 - Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012

BT - PM Applications and New Processes

PB - European Powder Metallurgy Association (EPMA)

Y2 - 16 September 2012 through 19 September 2012

ER -

Development of porous metal supports for H2 separation membranes: Surface modification

Abstract

Publication series

Conference

UN SDGs

Other files and links

Fingerprint

Cite this