Discrete part manufacturing energy efficiency improvements with modelling and simulation

Juhani Heilala; Marja Paju; Jari Montonen; Reino Ruusu; Mikel Sorli; Alberto Armijo; Pablo Bermell-Garcia; Simon Astwood; Santiago Quintana

doi:10.1007/978-3-642-40352-1_19

Discrete part manufacturing energy efficiency improvements with modelling and simulation

Juhani Heilala
, Marja Paju
, Jari Montonen
, Reino Ruusu
, Mikel Sorli
, Alberto Armijo
, Pablo Bermell-Garcia
, Simon Astwood
, Santiago Quintana

VTT Technical Research Centre of Finland Ltd.
Airbus Group

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

7 Citations (Scopus)

2 Downloads (Pure)

Abstract

Energy efficiency has become a key concern in industry due to increased energy cost and associated environmental impacts. It is as well factor on marketing and reputation. Customers require information on the ecological performance of products and the process to build that product. Therefore ecoefficient manufacturing is in our days a matter of competitiveness and economic success. This paper presents industrial driven research and the key findings from production eco and energy efficiency analysis and development projects. Both static and dynamic multi-level modelling and simulation is covered with examples. The use of Value Stream Mapping and Discrete Event Simulation with life cycle inventory data for production eco efficiency analysis is explained. Generic developement steps for process, machine and production system model with environmantal aspects is shown. Development continues in EPES "Eco Process Engineering System for Composition of Services to Optimise Product Life-Cycle"- project.

Original language	English
Title of host publication	Advances in Production Management Systems
Subtitle of host publication	Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers
Publisher	Springer New York LLC
Pages	142-150
Number of pages	9
Edition	PART 1
ISBN (Print)	9783642403514
DOIs	https://doi.org/10.1007/978-3-642-40352-1_19
Publication status	Published - 2013
Event	IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012 - Rhodes, Greece Duration: 24 Sept 2012 → 26 Sept 2012

Publication series

Name	IFIP Advances in Information and Communication Technology
Number	PART 1
Volume	397
ISSN (Print)	1868-4238

Conference

Conference	IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012
Country/Territory	Greece
City	Rhodes
Period	24/09/12 → 26/09/12

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 8 Decent Work and Economic Growth
SDG 9 Industry, Innovation, and Infrastructure
SDG 12 Responsible Consumption and Production

Keywords

Energy efficiency
Manufacturing
Modeling and simulation

Access to Document

10.1007/978-3-642-40352-1_19

Cite this

Heilala, J., Paju, M., Montonen, J., Ruusu, R., Sorli, M., Armijo, A., Bermell-Garcia, P., Astwood, S., & Quintana, S. (2013). Discrete part manufacturing energy efficiency improvements with modelling and simulation. In Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers (PART 1 ed., pp. 142-150). (IFIP Advances in Information and Communication Technology; Vol. 397, No. PART 1). Springer New York LLC. https://doi.org/10.1007/978-3-642-40352-1_19

Heilala, Juhani ; Paju, Marja ; Montonen, Jari et al. / Discrete part manufacturing energy efficiency improvements with modelling and simulation. Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers. PART 1. ed. Springer New York LLC, 2013. pp. 142-150 (IFIP Advances in Information and Communication Technology; PART 1).

@inproceedings{2e703b651971455b9939f13810dcd4aa,

title = "Discrete part manufacturing energy efficiency improvements with modelling and simulation",

abstract = "Energy efficiency has become a key concern in industry due to increased energy cost and associated environmental impacts. It is as well factor on marketing and reputation. Customers require information on the ecological performance of products and the process to build that product. Therefore ecoefficient manufacturing is in our days a matter of competitiveness and economic success. This paper presents industrial driven research and the key findings from production eco and energy efficiency analysis and development projects. Both static and dynamic multi-level modelling and simulation is covered with examples. The use of Value Stream Mapping and Discrete Event Simulation with life cycle inventory data for production eco efficiency analysis is explained. Generic developement steps for process, machine and production system model with environmantal aspects is shown. Development continues in EPES {"}Eco Process Engineering System for Composition of Services to Optimise Product Life-Cycle{"}- project.",

keywords = "Energy efficiency, Manufacturing, Modeling and simulation",

author = "Juhani Heilala and Marja Paju and Jari Montonen and Reino Ruusu and Mikel Sorli and Alberto Armijo and Pablo Bermell-Garcia and Simon Astwood and Santiago Quintana",

year = "2013",

doi = "10.1007/978-3-642-40352-1\_19",

language = "English",

isbn = "9783642403514",

series = "IFIP Advances in Information and Communication Technology",

publisher = "Springer New York LLC",

number = "PART 1",

pages = "142--150",

booktitle = "Advances in Production Management Systems",

edition = "PART 1",

note = "IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012 ; Conference date: 24-09-2012 Through 26-09-2012",

}

Heilala, J, Paju, M, Montonen, J, Ruusu, R, Sorli, M, Armijo, A, Bermell-Garcia, P, Astwood, S & Quintana, S 2013, Discrete part manufacturing energy efficiency improvements with modelling and simulation. in Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers. PART 1 edn, IFIP Advances in Information and Communication Technology, no. PART 1, vol. 397, Springer New York LLC, pp. 142-150, IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012, Rhodes, Greece, 24/09/12. https://doi.org/10.1007/978-3-642-40352-1_19

Discrete part manufacturing energy efficiency improvements with modelling and simulation. / Heilala, Juhani; Paju, Marja; Montonen, Jari et al.
Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers. PART 1. ed. Springer New York LLC, 2013. p. 142-150 (IFIP Advances in Information and Communication Technology; Vol. 397, No. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Discrete part manufacturing energy efficiency improvements with modelling and simulation

AU - Heilala, Juhani

AU - Paju, Marja

AU - Montonen, Jari

AU - Ruusu, Reino

AU - Sorli, Mikel

AU - Armijo, Alberto

AU - Bermell-Garcia, Pablo

AU - Astwood, Simon

AU - Quintana, Santiago

PY - 2013

Y1 - 2013

N2 - Energy efficiency has become a key concern in industry due to increased energy cost and associated environmental impacts. It is as well factor on marketing and reputation. Customers require information on the ecological performance of products and the process to build that product. Therefore ecoefficient manufacturing is in our days a matter of competitiveness and economic success. This paper presents industrial driven research and the key findings from production eco and energy efficiency analysis and development projects. Both static and dynamic multi-level modelling and simulation is covered with examples. The use of Value Stream Mapping and Discrete Event Simulation with life cycle inventory data for production eco efficiency analysis is explained. Generic developement steps for process, machine and production system model with environmantal aspects is shown. Development continues in EPES "Eco Process Engineering System for Composition of Services to Optimise Product Life-Cycle"- project.

AB - Energy efficiency has become a key concern in industry due to increased energy cost and associated environmental impacts. It is as well factor on marketing and reputation. Customers require information on the ecological performance of products and the process to build that product. Therefore ecoefficient manufacturing is in our days a matter of competitiveness and economic success. This paper presents industrial driven research and the key findings from production eco and energy efficiency analysis and development projects. Both static and dynamic multi-level modelling and simulation is covered with examples. The use of Value Stream Mapping and Discrete Event Simulation with life cycle inventory data for production eco efficiency analysis is explained. Generic developement steps for process, machine and production system model with environmantal aspects is shown. Development continues in EPES "Eco Process Engineering System for Composition of Services to Optimise Product Life-Cycle"- project.

KW - Energy efficiency

KW - Manufacturing

KW - Modeling and simulation

UR - https://www.scopus.com/pages/publications/84896076885

U2 - 10.1007/978-3-642-40352-1_19

DO - 10.1007/978-3-642-40352-1_19

M3 - Conference contribution

AN - SCOPUS:84896076885

SN - 9783642403514

T3 - IFIP Advances in Information and Communication Technology

SP - 142

EP - 150

BT - Advances in Production Management Systems

PB - Springer New York LLC

T2 - IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2012

Y2 - 24 September 2012 through 26 September 2012

ER -

Heilala J, Paju M, Montonen J, Ruusu R, Sorli M, Armijo A et al. Discrete part manufacturing energy efficiency improvements with modelling and simulation. In Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Revised Selected Papers. PART 1 ed. Springer New York LLC. 2013. p. 142-150. (IFIP Advances in Information and Communication Technology; PART 1). doi: 10.1007/978-3-642-40352-1_19

Discrete part manufacturing energy efficiency improvements with modelling and simulation

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this