Dual-band low-profile corrugated feeder antenna

Miguel Beruete Diaz; I. Campillo; J. S. Dolado; J. E. Rodríguez-Seco; E. Perea; Francisco Falcone; Mario Sorolla Ayza

doi:10.1109/TAP.2005.863380

Dual-band low-profile corrugated feeder antenna

Miguel Beruete Diaz, I. Campillo, J. S. Dolado, J. E. Rodríguez-Seco, E. Perea, Francisco Falcone, Mario Sorolla Ayza

Research output: Contribution to journal › Article › peer-review

85 Citations (Scopus)

Abstract

A dual-operating-band planar horn antenna having very low profile is presented in this paper. By opening a subwavelength aperture into a corrugated conducting plate, good return losses and a narrow radiated beam in each of the two desired operating frequency bands can be measured. This behavior is very similar to that observed in optical wavelengths where enhanced transmission was measured through apertures etched in metallic corrugated plates. Here, the double-corrugated structure has been scaled into the microwave frequency range and the excitation has been done by a conventional closed metallic waveguide placed in the rear part of the structure. In this way, a new concept of a very low profile feeder is proposed with potential wireless applications.

Original language	English
Pages (from-to)	340-350
Number of pages	11
Journal	IEEE Transactions on Antennas and Propagation
Volume	54
Issue number	2
DOIs	https://doi.org/10.1109/TAP.2005.863380
Publication status	Published - Feb 2006

Keywords

Double-periodic corrugated plate
Dual-band
Subwavelength aperture
Very low profile feeder

Access to Document

10.1109/TAP.2005.863380

Cite this

@article{540c9631b2ea45a5be001c18459edbd0,

title = "Dual-band low-profile corrugated feeder antenna",

abstract = "A dual-operating-band planar horn antenna having very low profile is presented in this paper. By opening a subwavelength aperture into a corrugated conducting plate, good return losses and a narrow radiated beam in each of the two desired operating frequency bands can be measured. This behavior is very similar to that observed in optical wavelengths where enhanced transmission was measured through apertures etched in metallic corrugated plates. Here, the double-corrugated structure has been scaled into the microwave frequency range and the excitation has been done by a conventional closed metallic waveguide placed in the rear part of the structure. In this way, a new concept of a very low profile feeder is proposed with potential wireless applications.",

keywords = "Double-periodic corrugated plate, Dual-band, Subwavelength aperture, Very low profile feeder",

author = "Diaz, {Miguel Beruete} and I. Campillo and Dolado, {J. S.} and Rodr{\'i}guez-Seco, {J. E.} and E. Perea and Francisco Falcone and Ayza, {Mario Sorolla}",

year = "2006",

month = feb,

doi = "10.1109/TAP.2005.863380",

language = "English",

volume = "54",

pages = "340--350",

journal = "IEEE Transactions on Antennas and Propagation",

issn = "0018-926X",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Dual-band low-profile corrugated feeder antenna

AU - Diaz, Miguel Beruete

AU - Campillo, I.

AU - Dolado, J. S.

AU - Rodríguez-Seco, J. E.

AU - Perea, E.

AU - Falcone, Francisco

AU - Ayza, Mario Sorolla

PY - 2006/2

Y1 - 2006/2

N2 - A dual-operating-band planar horn antenna having very low profile is presented in this paper. By opening a subwavelength aperture into a corrugated conducting plate, good return losses and a narrow radiated beam in each of the two desired operating frequency bands can be measured. This behavior is very similar to that observed in optical wavelengths where enhanced transmission was measured through apertures etched in metallic corrugated plates. Here, the double-corrugated structure has been scaled into the microwave frequency range and the excitation has been done by a conventional closed metallic waveguide placed in the rear part of the structure. In this way, a new concept of a very low profile feeder is proposed with potential wireless applications.

AB - A dual-operating-band planar horn antenna having very low profile is presented in this paper. By opening a subwavelength aperture into a corrugated conducting plate, good return losses and a narrow radiated beam in each of the two desired operating frequency bands can be measured. This behavior is very similar to that observed in optical wavelengths where enhanced transmission was measured through apertures etched in metallic corrugated plates. Here, the double-corrugated structure has been scaled into the microwave frequency range and the excitation has been done by a conventional closed metallic waveguide placed in the rear part of the structure. In this way, a new concept of a very low profile feeder is proposed with potential wireless applications.

KW - Double-periodic corrugated plate

KW - Dual-band

KW - Subwavelength aperture

KW - Very low profile feeder

UR - http://www.scopus.com/inward/record.url?scp=32444447227&partnerID=8YFLogxK

U2 - 10.1109/TAP.2005.863380

DO - 10.1109/TAP.2005.863380

M3 - Article

AN - SCOPUS:32444447227

SN - 0018-926X

VL - 54

SP - 340

EP - 350

JO - IEEE Transactions on Antennas and Propagation

JF - IEEE Transactions on Antennas and Propagation

IS - 2

ER -

Dual-band low-profile corrugated feeder antenna

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this