Eco-Process Engineering System for Composition of Services to Optimize Product Life-Cycle (EPES)

A. Armijo; J. Zuloaga; A. Vega; M. Sorli

doi:10.1016/j.proeng.2015.12.599

Eco-Process Engineering System for Composition of Services to Optimize Product Life-Cycle (EPES)

A. Armijo, J. Zuloaga, A. Vega, M. Sorli

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Abstract

This document is presenting the results of EPES (Eco Process Engineering System). EPES is intending to enable the industrial companies to generate innovative dynamic life-cycle services oriented to a continuous improvement of product operation and end-of-life use. The project running along three years and a half (September 2011 - February 2015) under the 7th Framework Programme of the European Commission, has developed a set of ICT tools plus a comprehensive methodology, which has been tested and validated through three Business Cases in three different industrial sectors, namely wind mills, energy and aeronautics.

Original language	English
Pages (from-to)	1081-1088
Number of pages	8
Journal	Procedia Engineering
Volume	132
DOIs	https://doi.org/10.1016/j.proeng.2015.12.599
Publication status	Published - 2015
Event	Manufacturing Engineering Society International Conference, MESIC 2015 - Barcelona, Spain Duration: 22 Jul 2015 → 24 Jul 2015

Keywords

business process management (BPM)
Eco-innovation
product life-cycle management (PLM)
sustainability intelligence (SI)
virtual collaborative networks (VCN)

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.proeng.2015.12.599

Cite this

@article{b2c0a49ee4a548d4a038810e5bb06a9a,

title = "Eco-Process Engineering System for Composition of Services to Optimize Product Life-Cycle (EPES)",

abstract = "This document is presenting the results of EPES (Eco Process Engineering System). EPES is intending to enable the industrial companies to generate innovative dynamic life-cycle services oriented to a continuous improvement of product operation and end-of-life use. The project running along three years and a half (September 2011 - February 2015) under the 7th Framework Programme of the European Commission, has developed a set of ICT tools plus a comprehensive methodology, which has been tested and validated through three Business Cases in three different industrial sectors, namely wind mills, energy and aeronautics.",

keywords = "business process management (BPM), Eco-innovation, product life-cycle management (PLM), sustainability intelligence (SI), virtual collaborative networks (VCN)",

author = "A. Armijo and J. Zuloaga and A. Vega and M. Sorli",

note = "Publisher Copyright: {\textcopyright} 2015 Published by Elsevier Ltd.; Manufacturing Engineering Society International Conference, MESIC 2015 ; Conference date: 22-07-2015 Through 24-07-2015",

year = "2015",

doi = "10.1016/j.proeng.2015.12.599",

language = "English",

volume = "132",

pages = "1081--1088",

journal = "Procedia Engineering",

issn = "1877-7058",

}

TY - JOUR

T1 - Eco-Process Engineering System for Composition of Services to Optimize Product Life-Cycle (EPES)

AU - Armijo, A.

AU - Zuloaga, J.

AU - Vega, A.

AU - Sorli, M.

PY - 2015

Y1 - 2015

N2 - This document is presenting the results of EPES (Eco Process Engineering System). EPES is intending to enable the industrial companies to generate innovative dynamic life-cycle services oriented to a continuous improvement of product operation and end-of-life use. The project running along three years and a half (September 2011 - February 2015) under the 7th Framework Programme of the European Commission, has developed a set of ICT tools plus a comprehensive methodology, which has been tested and validated through three Business Cases in three different industrial sectors, namely wind mills, energy and aeronautics.

AB - This document is presenting the results of EPES (Eco Process Engineering System). EPES is intending to enable the industrial companies to generate innovative dynamic life-cycle services oriented to a continuous improvement of product operation and end-of-life use. The project running along three years and a half (September 2011 - February 2015) under the 7th Framework Programme of the European Commission, has developed a set of ICT tools plus a comprehensive methodology, which has been tested and validated through three Business Cases in three different industrial sectors, namely wind mills, energy and aeronautics.

KW - business process management (BPM)

KW - Eco-innovation

KW - product life-cycle management (PLM)

KW - sustainability intelligence (SI)

KW - virtual collaborative networks (VCN)

UR - http://www.scopus.com/inward/record.url?scp=84962786955&partnerID=8YFLogxK

U2 - 10.1016/j.proeng.2015.12.599

DO - 10.1016/j.proeng.2015.12.599

M3 - Conference article

AN - SCOPUS:84962786955

SN - 1877-7058

VL - 132

SP - 1081

EP - 1088

JO - Procedia Engineering

JF - Procedia Engineering

T2 - Manufacturing Engineering Society International Conference, MESIC 2015

Y2 - 22 July 2015 through 24 July 2015

ER -

Eco-Process Engineering System for Composition of Services to Optimize Product Life-Cycle (EPES)

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this