Fabrication and testing of the first magnet package prototype for the srf linac of lipac

S. Sanz; F. De Aragón; J. Calero; J. De La Gama; J. L. Gutiérrez; I. Moya; I. Podadera; F. Toral; N. Bazin; P. Bosland; P. Brédy; G. Disset; N. Grouas; P. Hardy; V. Hennion; H. Jenhani; J. Migne; F. Orsini; J. Relland; B. Renard; E. Zaplatin

Fabrication and testing of the first magnet package prototype for the srf linac of lipac

S. Sanz^*
, F. De Aragón
, J. Calero
, J. De La Gama
, J. L. Gutiérrez
, I. Moya
, I. Podadera
, F. Toral
, N. Bazin
, P. Bosland
, P. Brédy
, G. Disset
, N. Grouas
, P. Hardy
, V. Hennion
, H. Jenhani
, J. Migne
, F. Orsini
, J. Relland
, B. Renard

E. Zaplatin

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Abstract

The Linear IFMIF Prototype Accelerator (LIPAc) will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the harmful stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the tests realized in warm and cold conditions. Special attention is put to the training test of the main solenoid, since the nominal working point in the load line is very high (86.2%).

Original language	English
Title of host publication	IPAC 2011 - 2nd International Particle Accelerator Conference
Pages	2463-2465
Number of pages	3
Publication status	Published - 2011
Externally published	Yes
Event	2nd International Particle Accelerator Conference, IPAC 2011 - Kursaal, San Sebastian, Spain Duration: 4 Sept 2011 → 9 Sept 2011

Publication series

Name	IPAC 2011 - 2nd International Particle Accelerator Conference

Conference

Conference	2nd International Particle Accelerator Conference, IPAC 2011
Country/Territory	Spain
City	Kursaal, San Sebastian
Period	4/09/11 → 9/09/11

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Cite this

Sanz, S., De Aragón, F., Calero, J., De La Gama, J., Gutiérrez, J. L., Moya, I., Podadera, I., Toral, F., Bazin, N., Bosland, P., Brédy, P., Disset, G., Grouas, N., Hardy, P., Hennion, V., Jenhani, H., Migne, J., Orsini, F., Relland, J., ... Zaplatin, E. (2011). Fabrication and testing of the first magnet package prototype for the srf linac of lipac. In IPAC 2011 - 2nd International Particle Accelerator Conference (pp. 2463-2465). (IPAC 2011 - 2nd International Particle Accelerator Conference).

@inproceedings{b4d159ad36394deaa52beee3dc6deb1b,

title = "Fabrication and testing of the first magnet package prototype for the srf linac of lipac",

abstract = "The Linear IFMIF Prototype Accelerator (LIPAc) will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the harmful stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the tests realized in warm and cold conditions. Special attention is put to the training test of the main solenoid, since the nominal working point in the load line is very high (86.2\%).",

author = "S. Sanz and \{De Arag{\'o}n\}, F. and J. Calero and \{De La Gama\}, J. and Guti{\'e}rrez, \{J. L.\} and I. Moya and I. Podadera and F. Toral and N. Bazin and P. Bosland and P. Br{\'e}dy and G. Disset and N. Grouas and P. Hardy and V. Hennion and H. Jenhani and J. Migne and F. Orsini and J. Relland and B. Renard and E. Zaplatin",

year = "2011",

language = "English",

isbn = "9789290833666",

series = "IPAC 2011 - 2nd International Particle Accelerator Conference",

pages = "2463--2465",

booktitle = "IPAC 2011 - 2nd International Particle Accelerator Conference",

note = "2nd International Particle Accelerator Conference, IPAC 2011 ; Conference date: 04-09-2011 Through 09-09-2011",

}

Sanz, S, De Aragón, F, Calero, J, De La Gama, J, Gutiérrez, JL, Moya, I, Podadera, I, Toral, F, Bazin, N, Bosland, P, Brédy, P, Disset, G, Grouas, N, Hardy, P, Hennion, V, Jenhani, H, Migne, J, Orsini, F, Relland, J, Renard, B & Zaplatin, E 2011, Fabrication and testing of the first magnet package prototype for the srf linac of lipac. in IPAC 2011 - 2nd International Particle Accelerator Conference. IPAC 2011 - 2nd International Particle Accelerator Conference, pp. 2463-2465, 2nd International Particle Accelerator Conference, IPAC 2011, Kursaal, San Sebastian, Spain, 4/09/11.

Fabrication and testing of the first magnet package prototype for the srf linac of lipac. / Sanz, S.; De Aragón, F.; Calero, J. et al.
IPAC 2011 - 2nd International Particle Accelerator Conference. 2011. p. 2463-2465 (IPAC 2011 - 2nd International Particle Accelerator Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Fabrication and testing of the first magnet package prototype for the srf linac of lipac

AU - Sanz, S.

AU - De Aragón, F.

AU - Calero, J.

AU - De La Gama, J.

AU - Gutiérrez, J. L.

AU - Moya, I.

AU - Podadera, I.

AU - Toral, F.

AU - Bazin, N.

AU - Bosland, P.

AU - Brédy, P.

AU - Disset, G.

AU - Grouas, N.

AU - Hardy, P.

AU - Hennion, V.

AU - Jenhani, H.

AU - Migne, J.

AU - Orsini, F.

AU - Relland, J.

AU - Renard, B.

AU - Zaplatin, E.

PY - 2011

Y1 - 2011

N2 - The Linear IFMIF Prototype Accelerator (LIPAc) will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the harmful stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the tests realized in warm and cold conditions. Special attention is put to the training test of the main solenoid, since the nominal working point in the load line is very high (86.2%).

AB - The Linear IFMIF Prototype Accelerator (LIPAc) will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF accelerator. The SRF Linac design is based on superconducting Half Wave Resonators (HWR) cavities operating at 4.4 K. Due to space charge associated to the high intensity beam, a short, but strong, superconducting focusing magnet package is necessary between cavities. The selected configuration has been a superconducting NbTi solenoid acting as a magnetic lens and a concentric outer solenoid in antiparallel configuration to reduce the harmful stray field on the cavities. The selected arrangement for the steerers is a pair of parallel racetrack coils for each vertical and horizontal axis. This paper describes the manufacturing techniques of the different coils, and the tests realized in warm and cold conditions. Special attention is put to the training test of the main solenoid, since the nominal working point in the load line is very high (86.2%).

UR - https://www.scopus.com/pages/publications/84885800445

M3 - Conference contribution

AN - SCOPUS:84885800445

SN - 9789290833666

T3 - IPAC 2011 - 2nd International Particle Accelerator Conference

SP - 2463

EP - 2465

BT - IPAC 2011 - 2nd International Particle Accelerator Conference

T2 - 2nd International Particle Accelerator Conference, IPAC 2011

Y2 - 4 September 2011 through 9 September 2011

ER -

Fabrication and testing of the first magnet package prototype for the srf linac of lipac

Abstract

Publication series

Conference

UN SDGs

Other files and links

Fingerprint

Cite this