Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers

I. Del Villar; C. R. Zamarreño; P. Sanchez; M. Hernaez; C. F. Valdivielso; F. J. Arregui; I. R. Matias

doi:10.1088/2040-8978/12/9/095503

Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers

I. Del Villar^*
, C. R. Zamarreño
, P. Sanchez
, M. Hernaez
, C. F. Valdivielso
, F. J. Arregui
, I. R. Matias

^*Corresponding author for this work

Public University of Navarre

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different dielectric dispersion, which leads to the generation of single-peak lossy mode resonances with the ITO coated optical fibers and dual-peak lossy mode resonances with the In₂O₃ coated optical fibers. The obvious advantage of a dual-peak based measurement in the sensors field is enhanced by a sensitivity increase observed in sensors based on In₂O₃ if compared with those based on ITO. These characteristics are analyzed both theoretically and experimentally.

Original language	English
Article number	095503
Journal	Journal of Instrumentation
Volume	5
Issue number	9
DOIs	https://doi.org/10.1088/2040-8978/12/9/095503
Publication status	Published - Sept 2010
Externally published	Yes

Keywords

Indium oxide
ITO
Optical fiber sensors
Resonances
Thin films

Access to Document

10.1088/2040-8978/12/9/095503Licence: Unspecified

Cite this

@article{f5c15a9855364696b4ecaecddde7ce22,

title = "Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers",

abstract = "A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different dielectric dispersion, which leads to the generation of single-peak lossy mode resonances with the ITO coated optical fibers and dual-peak lossy mode resonances with the In2O3 coated optical fibers. The obvious advantage of a dual-peak based measurement in the sensors field is enhanced by a sensitivity increase observed in sensors based on In2O3 if compared with those based on ITO. These characteristics are analyzed both theoretically and experimentally.",

keywords = "Indium oxide, ITO, Optical fiber sensors, Resonances, Thin films",

author = "\{Del Villar\}, I. and Zamarre{\~n}o, \{C. R.\} and P. Sanchez and M. Hernaez and Valdivielso, \{C. F.\} and Arregui, \{F. J.\} and Matias, \{I. R.\}",

year = "2010",

month = sep,

doi = "10.1088/2040-8978/12/9/095503",

language = "English",

volume = "5",

journal = "Journal of Instrumentation",

issn = "1748-0221",

publisher = "IOP Publishing Ltd.",

number = "9",

}

TY - JOUR

T1 - Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers

AU - Del Villar, I.

AU - Zamarreño, C. R.

AU - Sanchez, P.

AU - Hernaez, M.

AU - Valdivielso, C. F.

AU - Arregui, F. J.

AU - Matias, I. R.

PY - 2010/9

Y1 - 2010/9

N2 - A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different dielectric dispersion, which leads to the generation of single-peak lossy mode resonances with the ITO coated optical fibers and dual-peak lossy mode resonances with the In2O3 coated optical fibers. The obvious advantage of a dual-peak based measurement in the sensors field is enhanced by a sensitivity increase observed in sensors based on In2O3 if compared with those based on ITO. These characteristics are analyzed both theoretically and experimentally.

AB - A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different dielectric dispersion, which leads to the generation of single-peak lossy mode resonances with the ITO coated optical fibers and dual-peak lossy mode resonances with the In2O3 coated optical fibers. The obvious advantage of a dual-peak based measurement in the sensors field is enhanced by a sensitivity increase observed in sensors based on In2O3 if compared with those based on ITO. These characteristics are analyzed both theoretically and experimentally.

KW - Indium oxide

KW - ITO

KW - Optical fiber sensors

KW - Resonances

KW - Thin films

UR - https://www.scopus.com/pages/publications/78249267943

U2 - 10.1088/2040-8978/12/9/095503

DO - 10.1088/2040-8978/12/9/095503

M3 - Article

AN - SCOPUS:78249267943

SN - 1748-0221

VL - 5

JO - Journal of Instrumentation

JF - Journal of Instrumentation

IS - 9

M1 - 095503

ER -

Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this