Implementing incremental sheet metal forming on a cncmachining centre

Antonio Calvino; Asuncion Rivero; Miguel Álvarez; Francisco Puerta; Jorge Salguero; Mariano Marcos

doi:10.2507/26th.daaam.proceedings.129

Implementing incremental sheet metal forming on a cncmachining centre

Antonio Calvino
, Asuncion Rivero
, Miguel Álvarez
, Francisco Puerta
, Jorge Salguero
, Mariano Marcos

University of Cádiz
Foundation TECNALIA Research & Innovation

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Incremental Sheet Forming (ISF) process emerges as an alternative to classic shaping processes. Two variants of the IS process are used: negative forming or SPIF (Single Point Incremental Forming), in which it is not necessary using a die and positive forming or TPIF (Two Point Incremental Forming) ISF is usually performed on specifically designed machines controlled by CNC or in retrofitted CNC milling machines However, in the most of cases, the possibility of combining milling and ISF is not considered This paper is focused on a study about the implementation of ISF process in a CNC machining center through the specifi design of the clamping tools. So, it is not necessary to retrofit the machining center and it is possible to think abou combining both processes in multitask operations.

Original language	English
Title of host publication	Proceedings of the 26th DAAAM International Symposium, DAAAM 2015
Editors	Branko Katalinic
Publisher	Danube Adria Association for Automation and Manufacturing, DAAAM
Pages	926-929
Number of pages	4
ISBN (Electronic)	9783902734075
DOIs	https://doi.org/10.2507/26th.daaam.proceedings.129
Publication status	Published - 2015
Externally published	Yes
Event	26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015 - Zadar, Croatia Duration: 21 Oct 2015 → 24 Oct 2015

Publication series

Name	Annals of DAAAM and Proceedings of the International DAAAM Symposium
Volume	2015-January
ISSN (Print)	1726-9679

Conference

Conference	26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015
Country/Territory	Croatia
City	Zadar
Period	21/10/15 → 24/10/15

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

CNC
Clamping
Incremental Sheet Forming
Tooling design

Access to Document

10.2507/26th.daaam.proceedings.129

IMPLEMENTING INCREMENTAL SHEET METALLicence: Unspecified

Cite this

Calvino, A., Rivero, A., Álvarez, M., Puerta, F., Salguero, J., & Marcos, M. (2015). Implementing incremental sheet metal forming on a cncmachining centre. In B. Katalinic (Ed.), Proceedings of the 26th DAAAM International Symposium, DAAAM 2015 (pp. 926-929). (Annals of DAAAM and Proceedings of the International DAAAM Symposium; Vol. 2015-January). Danube Adria Association for Automation and Manufacturing, DAAAM. https://doi.org/10.2507/26th.daaam.proceedings.129

Calvino, Antonio ; Rivero, Asuncion ; Álvarez, Miguel et al. / Implementing incremental sheet metal forming on a cncmachining centre. Proceedings of the 26th DAAAM International Symposium, DAAAM 2015. editor / Branko Katalinic. Danube Adria Association for Automation and Manufacturing, DAAAM, 2015. pp. 926-929 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).

@inproceedings{d2e79d618a0e46e3be83d5a25c2e7e16,

title = "Implementing incremental sheet metal forming on a cncmachining centre",

abstract = "Incremental Sheet Forming (ISF) process emerges as an alternative to classic shaping processes. Two variants of the IS process are used: negative forming or SPIF (Single Point Incremental Forming), in which it is not necessary using a die and positive forming or TPIF (Two Point Incremental Forming) ISF is usually performed on specifically designed machines controlled by CNC or in retrofitted CNC milling machines However, in the most of cases, the possibility of combining milling and ISF is not considered This paper is focused on a study about the implementation of ISF process in a CNC machining center through the specifi design of the clamping tools. So, it is not necessary to retrofit the machining center and it is possible to think abou combining both processes in multitask operations.",

keywords = "CNC, Clamping, Incremental Sheet Forming, Tooling design",

author = "Antonio Calvino and Asuncion Rivero and Miguel {\'A}lvarez and Francisco Puerta and Jorge Salguero and Mariano Marcos",

year = "2015",

doi = "10.2507/26th.daaam.proceedings.129",

language = "English",

series = "Annals of DAAAM and Proceedings of the International DAAAM Symposium",

publisher = "Danube Adria Association for Automation and Manufacturing, DAAAM",

pages = "926--929",

editor = "Branko Katalinic",

booktitle = "Proceedings of the 26th DAAAM International Symposium, DAAAM 2015",

note = "26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015 ; Conference date: 21-10-2015 Through 24-10-2015",

}

Calvino, A, Rivero, A, Álvarez, M, Puerta, F, Salguero, J & Marcos, M 2015, Implementing incremental sheet metal forming on a cncmachining centre. in B Katalinic (ed.), Proceedings of the 26th DAAAM International Symposium, DAAAM 2015. Annals of DAAAM and Proceedings of the International DAAAM Symposium, vol. 2015-January, Danube Adria Association for Automation and Manufacturing, DAAAM, pp. 926-929, 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015, Zadar, Croatia, 21/10/15. https://doi.org/10.2507/26th.daaam.proceedings.129

Implementing incremental sheet metal forming on a cncmachining centre. / Calvino, Antonio; Rivero, Asuncion; Álvarez, Miguel et al.
Proceedings of the 26th DAAAM International Symposium, DAAAM 2015. ed. / Branko Katalinic. Danube Adria Association for Automation and Manufacturing, DAAAM, 2015. p. 926-929 (Annals of DAAAM and Proceedings of the International DAAAM Symposium; Vol. 2015-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Implementing incremental sheet metal forming on a cncmachining centre

AU - Calvino, Antonio

AU - Rivero, Asuncion

AU - Álvarez, Miguel

AU - Puerta, Francisco

AU - Salguero, Jorge

AU - Marcos, Mariano

PY - 2015

Y1 - 2015

N2 - Incremental Sheet Forming (ISF) process emerges as an alternative to classic shaping processes. Two variants of the IS process are used: negative forming or SPIF (Single Point Incremental Forming), in which it is not necessary using a die and positive forming or TPIF (Two Point Incremental Forming) ISF is usually performed on specifically designed machines controlled by CNC or in retrofitted CNC milling machines However, in the most of cases, the possibility of combining milling and ISF is not considered This paper is focused on a study about the implementation of ISF process in a CNC machining center through the specifi design of the clamping tools. So, it is not necessary to retrofit the machining center and it is possible to think abou combining both processes in multitask operations.

AB - Incremental Sheet Forming (ISF) process emerges as an alternative to classic shaping processes. Two variants of the IS process are used: negative forming or SPIF (Single Point Incremental Forming), in which it is not necessary using a die and positive forming or TPIF (Two Point Incremental Forming) ISF is usually performed on specifically designed machines controlled by CNC or in retrofitted CNC milling machines However, in the most of cases, the possibility of combining milling and ISF is not considered This paper is focused on a study about the implementation of ISF process in a CNC machining center through the specifi design of the clamping tools. So, it is not necessary to retrofit the machining center and it is possible to think abou combining both processes in multitask operations.

KW - CNC

KW - Clamping

KW - Incremental Sheet Forming

KW - Tooling design

UR - https://www.scopus.com/pages/publications/84987646167

U2 - 10.2507/26th.daaam.proceedings.129

DO - 10.2507/26th.daaam.proceedings.129

M3 - Conference contribution

AN - SCOPUS:84987646167

T3 - Annals of DAAAM and Proceedings of the International DAAAM Symposium

SP - 926

EP - 929

BT - Proceedings of the 26th DAAAM International Symposium, DAAAM 2015

A2 - Katalinic, Branko

PB - Danube Adria Association for Automation and Manufacturing, DAAAM

T2 - 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015

Y2 - 21 October 2015 through 24 October 2015

ER -

Calvino A, Rivero A, Álvarez M, Puerta F, Salguero J, Marcos M. Implementing incremental sheet metal forming on a cncmachining centre. In Katalinic B, editor, Proceedings of the 26th DAAAM International Symposium, DAAAM 2015. Danube Adria Association for Automation and Manufacturing, DAAAM. 2015. p. 926-929. (Annals of DAAAM and Proceedings of the International DAAAM Symposium). doi: 10.2507/26th.daaam.proceedings.129

Implementing incremental sheet metal forming on a cncmachining centre

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this