Mechanical and phase stability of TiBC coatings up to 1000 C

TiBC coatings with different phase compositions (nanocrystalline TiB _xC_y or TiB₂ phases mixed or not with amorphous carbon, a-C) were prepared by magnetron sputtering. These coatings were comparatively studied in terms of phase stability after thermal annealing at 250, 500, 750, and 1000 C in argon using Raman and x-ray absorption near-edge spectroscopy techniques. The main differences were observed at temperatures above 500 C when oxidation processes occur and the mechanical properties deteriorate. At 1000 C, the samples were fully oxidized forming a-C, TiO ₂, and B₂O₃ as final products. Higher hardness and reduced indentation modulus values and better tribological properties were observed at 750 C for nanocomposite structures including amorphous carbon and ternary TiB_xC_y phases. This behavior is attributed to a protective effect associated with the a-C phase which is achieved by the encapsulation of the nanocrystals in the coating and the better hard/lubricant phase ratio associated with this type of coating.