Power electric aiding controller for automated bus stopping

Jorge Godoy; Vicente Milanés; Joshue Pérez; Jorge Villagrá; Carlos González

doi:10.1109/CPE.2011.5942256

Power electric aiding controller for automated bus stopping

Jorge Godoy^*
, Vicente Milanés
, Joshue Pérez
, Jorge Villagrá
, Carlos González

^*Corresponding author for this work

UPM-CSIC

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Day by day the number of vehicles on roads is growing, increasing also the number of accidents, traffic jams and carbon dioxide emissions. For this reason, the European Union has adopted an action plan for improving urban mobility where the public transport is the main key. To present day, solutions as special bus lanes, electrical and hydrogen buses and rail-guided buses have been tested and implemented in several cities as London and Madrid. In this article an automated stopping system for electrical buses is presented. Stopping system have been implemented by the AUTOPIA program on an electric minibus and tested on a private circuit with satisfactory results.

Original language	English
Title of host publication	2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings
Pages	330-335
Number of pages	6
DOIs	https://doi.org/10.1109/CPE.2011.5942256
Publication status	Published - 2011
Externally published	Yes
Event	2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Tallinn, Estonia Duration: 1 Jun 2011 → 3 Jun 2011

Publication series

Name	2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings

Conference

Conference	2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011
Country/Territory	Estonia
City	Tallinn
Period	1/06/11 → 3/06/11

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 11 Sustainable Cities and Communities
SDG 13 Climate Action

Access to Document

10.1109/CPE.2011.5942256

Cite this

Godoy, J., Milanés, V., Pérez, J., Villagrá, J., & González, C. (2011). Power electric aiding controller for automated bus stopping. In 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings (pp. 330-335). Article 5942256 (2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings). https://doi.org/10.1109/CPE.2011.5942256

@inproceedings{f2323aeb6c9641faa8166ddfccad0236,

title = "Power electric aiding controller for automated bus stopping",

abstract = "Day by day the number of vehicles on roads is growing, increasing also the number of accidents, traffic jams and carbon dioxide emissions. For this reason, the European Union has adopted an action plan for improving urban mobility where the public transport is the main key. To present day, solutions as special bus lanes, electrical and hydrogen buses and rail-guided buses have been tested and implemented in several cities as London and Madrid. In this article an automated stopping system for electrical buses is presented. Stopping system have been implemented by the AUTOPIA program on an electric minibus and tested on a private circuit with satisfactory results.",

author = "Jorge Godoy and Vicente Milan{\'e}s and Joshue P{\'e}rez and Jorge Villagr{\'a} and Carlos Gonz{\'a}lez",

year = "2011",

doi = "10.1109/CPE.2011.5942256",

language = "English",

isbn = "9781424488070",

series = "2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings",

pages = "330--335",

booktitle = "2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings",

note = "2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 ; Conference date: 01-06-2011 Through 03-06-2011",

}

Godoy, J, Milanés, V, Pérez, J, Villagrá, J & González, C 2011, Power electric aiding controller for automated bus stopping. in 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings., 5942256, 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings, pp. 330-335, 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011, Tallinn, Estonia, 1/06/11. https://doi.org/10.1109/CPE.2011.5942256

Power electric aiding controller for automated bus stopping. / Godoy, Jorge; Milanés, Vicente; Pérez, Joshue et al.
2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings. 2011. p. 330-335 5942256 (2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power electric aiding controller for automated bus stopping

AU - Godoy, Jorge

AU - Milanés, Vicente

AU - Pérez, Joshue

AU - Villagrá, Jorge

AU - González, Carlos

PY - 2011

Y1 - 2011

N2 - Day by day the number of vehicles on roads is growing, increasing also the number of accidents, traffic jams and carbon dioxide emissions. For this reason, the European Union has adopted an action plan for improving urban mobility where the public transport is the main key. To present day, solutions as special bus lanes, electrical and hydrogen buses and rail-guided buses have been tested and implemented in several cities as London and Madrid. In this article an automated stopping system for electrical buses is presented. Stopping system have been implemented by the AUTOPIA program on an electric minibus and tested on a private circuit with satisfactory results.

AB - Day by day the number of vehicles on roads is growing, increasing also the number of accidents, traffic jams and carbon dioxide emissions. For this reason, the European Union has adopted an action plan for improving urban mobility where the public transport is the main key. To present day, solutions as special bus lanes, electrical and hydrogen buses and rail-guided buses have been tested and implemented in several cities as London and Madrid. In this article an automated stopping system for electrical buses is presented. Stopping system have been implemented by the AUTOPIA program on an electric minibus and tested on a private circuit with satisfactory results.

UR - https://www.scopus.com/pages/publications/79961152863

U2 - 10.1109/CPE.2011.5942256

DO - 10.1109/CPE.2011.5942256

M3 - Conference contribution

AN - SCOPUS:79961152863

SN - 9781424488070

T3 - 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings

SP - 330

EP - 335

BT - 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings

T2 - 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011

Y2 - 1 June 2011 through 3 June 2011

ER -

Godoy J, Milanés V, Pérez J, Villagrá J, González C. Power electric aiding controller for automated bus stopping. In 2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings. 2011. p. 330-335. 5942256. (2011 7th International Conference-Workshop Compatibility and Power Electronics, CPE 2011 - Conference Proceedings). doi: 10.1109/CPE.2011.5942256

Power electric aiding controller for automated bus stopping

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this