Preparation and characterization of metallic supported thin Pd–Ag membranes for hydrogen separation

Ekain Fernandez, Jose Antonio Medrano, Jon Melendez, Maria Parco, Jose Luis Viviente, Martin van Sint Annaland, Fausto Gallucci, D. A. Pacheco Tanaka

Research output: Contribution to journalArticlepeer-review

89 Citations (Scopus)

Abstract

This paper reports the preparation and characterization of thin-film (4–5 μm thick) Pd–Ag metallic supported membranes for high temperature applications. Various thin film membranes have been prepared by depositing a ceramic interdiffusion barrier layer prior to the simultaneous Pd–Ag electroless plating deposition. Two deposition techniques for ceramic layers (made of zirconia and alumina) have been evaluated: Atmospheric Plasma Spraying and dip coating of a powder suspension. Initially, the prepared ceramic layers have been characterized for nitrogen permeation at room temperature and surface roughness for the selection of the appropriate type of ceramic layer. The most promising membranes have been tested at 400–600 °C for single gas permeation (H2 and N2), and have shown extremely high H2/N2 permselectivities (>200,000).

Original languageEnglish
Pages (from-to)182-190
Number of pages9
JournalChemical Engineering Journal
Volume305
DOIs
Publication statusPublished - 1 Dec 2016

Keywords

  • Alumina
  • H separation
  • Interdiffusion barrier layer
  • Metallic support
  • Palladium membrane preparation
  • Zirconia

Fingerprint

Dive into the research topics of 'Preparation and characterization of metallic supported thin Pd–Ag membranes for hydrogen separation'. Together they form a unique fingerprint.

Cite this