The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

E. San Telmo; I. Canales; J. L. Villate; E. Robles; S. Apinaniz

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

E. San Telmo^*
, I. Canales
, J. L. Villate
, E. Robles
, S. Apinaniz

^*Corresponding author for this work

Foundation TECNALIA Research & Innovation

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

Original language	English
Title of host publication	European Wind Energy Conference and Exhibition 2007, EWEC 2007
Pages	1517-1521
Number of pages	5
Publication status	Published - 2007
Event	European Wind Energy Conference and Exhibition 2007, EWEC 2007 - Milan, Italy Duration: 7 May 2007 → 10 May 2007

Publication series

Name	European Wind Energy Conference and Exhibition 2007, EWEC 2007
Volume	3

Conference

Conference	European Wind Energy Conference and Exhibition 2007, EWEC 2007
Country/Territory	Italy
City	Milan
Period	7/05/07 → 10/05/07

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Communication
Iec 61400-25
Integration
Interoperability
Wind power plants

Cite this

@inproceedings{785a7022ab8547fc816f7e4c0d6965b3,

title = "The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability",

abstract = "The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.",

keywords = "Communication, Iec 61400-25, Integration, Interoperability, Wind power plants",

author = "\{San Telmo\}, E. and I. Canales and Villate, \{J. L.\} and E. Robles and S. Apinaniz",

year = "2007",

language = "English",

isbn = "9781622764686",

series = "European Wind Energy Conference and Exhibition 2007, EWEC 2007",

pages = "1517--1521",

booktitle = "European Wind Energy Conference and Exhibition 2007, EWEC 2007",

note = "European Wind Energy Conference and Exhibition 2007, EWEC 2007 ; Conference date: 07-05-2007 Through 10-05-2007",

}

San Telmo, E, Canales, I, Villate, JL , Robles, E & Apinaniz, S 2007, The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability. in European Wind Energy Conference and Exhibition 2007, EWEC 2007. European Wind Energy Conference and Exhibition 2007, EWEC 2007, vol. 3, pp. 1517-1521, European Wind Energy Conference and Exhibition 2007, EWEC 2007, Milan, Italy, 7/05/07.

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability. / San Telmo, E.; Canales, I.; Villate, J. L. et al.
European Wind Energy Conference and Exhibition 2007, EWEC 2007. 2007. p. 1517-1521 (European Wind Energy Conference and Exhibition 2007, EWEC 2007; Vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

AU - San Telmo, E.

AU - Canales, I.

AU - Villate, J. L.

AU - Robles, E.

AU - Apinaniz, S.

PY - 2007

Y1 - 2007

N2 - The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

AB - The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

KW - Communication

KW - Iec 61400-25

KW - Integration

KW - Interoperability

KW - Wind power plants

UR - https://www.scopus.com/pages/publications/84875349623

M3 - Conference contribution

AN - SCOPUS:84875349623

SN - 9781622764686

T3 - European Wind Energy Conference and Exhibition 2007, EWEC 2007

SP - 1517

EP - 1521

BT - European Wind Energy Conference and Exhibition 2007, EWEC 2007

T2 - European Wind Energy Conference and Exhibition 2007, EWEC 2007

Y2 - 7 May 2007 through 10 May 2007

ER -

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

Abstract

Publication series

Conference

UN SDGs

Keywords

Other files and links

Fingerprint

Cite this