Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

AC/DC Millivoltage Sensor by means of ITO-coated Optical Fibers: Towards Monitoring of Biosignals

  • K. I. Aginaga-Etxamendi
  • , A. B. Socorro-Leranoz
  • , O. Fuentes
  • , I. Del Villar
  • , J. M. Corres
  • , I. R. Matias

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

3 Citas (Scopus)

Resumen

This contribution shows the monitoring of AC and DC millivoltage signals by means of lossy mode resonances generated by Indium Tin Oxide (ITO) on optical fibers. Sensors were obtained by sputtering ITO thin-films onto 25 mm-length segments of 200 μm bare optical fibers. Depositing a 1 μm thin-film of ITO leads to obtain reduced thin-film resistances of near 340 ohms. This allows the detection of voltage signals by monitoring the wavelength shift of the resonances. Sensitivities up to 40 nm/V can be achieved when tracking sinusoidal signals of a few cents of mV peak-to-peak. This opens the path for further research pursuing the detection of biomedical signals.

Idioma originalInglés
Título de la publicación alojada2019 IEEE Sensors, SENSORS 2019 - Conference Proceedings
EditorialInstitute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)9781728116341
DOI
EstadoPublicada - oct 2019
Publicado de forma externa
Evento18th IEEE Sensors, SENSORS 2019 - Montreal, Canadá
Duración: 27 oct 201930 oct 2019

Serie de la publicación

NombreProceedings of IEEE Sensors
Volumen2019-October
ISSN (versión impresa)1930-0395
ISSN (versión digital)2168-9229

Conferencia

Conferencia18th IEEE Sensors, SENSORS 2019
País/TerritorioCanadá
CiudadMontreal
Período27/10/1930/10/19

Huella

Profundice en los temas de investigación de 'AC/DC Millivoltage Sensor by means of ITO-coated Optical Fibers: Towards Monitoring of Biosignals'. En conjunto forman una huella única.

Citar esto