Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating

N. Azurmendi; B. Canflanca; I. Caro; R. Ávila

Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

Resumen

This paper presents an investigation of the mechanical and physical-chemical properties of an epoxy/carbon fibre prepreg (Hexply 8552/IM7) cured using an out-of-autoclave manufacturing method radiofrequency heating. The purpose of the investigation was to explore the effect of the new curing technique on the carbon fibre prepreg material properties and the process potential to reduce the manufacturing costs is envisaged. The cure cycle time was reduced by 60% compared to the conventional heating process. Test results indicated that the degree of cure, glass transition temperature and interlaminar shear strength were in the range of the conventional curing process values.

Idioma original	Inglés
Título de la publicación alojada	Microwave and RF Power Applications
Subtítulo de la publicación alojada	Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011
Editorial	Editions Cepadues
Páginas	207-210
Número de páginas	4
ISBN (versión impresa)	9782854289787
Estado	Publicada - 2011
Publicado de forma externa	Sí
Evento	13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011 - Toulouse, Francia Duración: 5 sept 2011 → 8 sept 2011

Serie de la publicación

Nombre	Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011

Conferencia

Conferencia	13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011
País/Territorio	Francia
Ciudad	Toulouse
Período	5/09/11 → 8/09/11

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 9: Industria, innovación e infraestructura

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Azurmendi, N., Canflanca, B., Caro, I., & Ávila, R. (2011). Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating. En Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011 (pp. 207-210). (Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011). Editions Cepadues.

Azurmendi, N. ; Canflanca, B. ; Caro, I. et al. / Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating. Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011. Editions Cepadues, 2011. pp. 207-210 (Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011).

@inproceedings{746d755d2f984577bf763de1c8861854,

title = "Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating",

abstract = "This paper presents an investigation of the mechanical and physical-chemical properties of an epoxy/carbon fibre prepreg (Hexply 8552/IM7) cured using an out-of-autoclave manufacturing method radiofrequency heating. The purpose of the investigation was to explore the effect of the new curing technique on the carbon fibre prepreg material properties and the process potential to reduce the manufacturing costs is envisaged. The cure cycle time was reduced by 60\% compared to the conventional heating process. Test results indicated that the degree of cure, glass transition temperature and interlaminar shear strength were in the range of the conventional curing process values.",

keywords = "Carbon fibre, Component, Composite, Dielectric heating, Epoxy, Out-of-autoclave curing, Radiofrequency",

author = "N. Azurmendi and B. Canflanca and I. Caro and R. {\'A}vila",

year = "2011",

language = "English",

isbn = "9782854289787",

series = "Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011",

publisher = "Editions Cepadues",

pages = "207--210",

booktitle = "Microwave and RF Power Applications",

note = "13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011 ; Conference date: 05-09-2011 Through 08-09-2011",

}

Azurmendi, N , Canflanca, B , Caro, I & Ávila, R 2011, Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating. En Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011. Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011, Editions Cepadues, pp. 207-210, 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011, Toulouse, Francia, 5/09/11.

Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating. / Azurmendi, N.; Canflanca, B.; Caro, I. et al.
Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011. Editions Cepadues, 2011. p. 207-210 (Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating

AU - Azurmendi, N.

AU - Canflanca, B.

AU - Caro, I.

AU - Ávila, R.

PY - 2011

Y1 - 2011

N2 - This paper presents an investigation of the mechanical and physical-chemical properties of an epoxy/carbon fibre prepreg (Hexply 8552/IM7) cured using an out-of-autoclave manufacturing method radiofrequency heating. The purpose of the investigation was to explore the effect of the new curing technique on the carbon fibre prepreg material properties and the process potential to reduce the manufacturing costs is envisaged. The cure cycle time was reduced by 60% compared to the conventional heating process. Test results indicated that the degree of cure, glass transition temperature and interlaminar shear strength were in the range of the conventional curing process values.

AB - This paper presents an investigation of the mechanical and physical-chemical properties of an epoxy/carbon fibre prepreg (Hexply 8552/IM7) cured using an out-of-autoclave manufacturing method radiofrequency heating. The purpose of the investigation was to explore the effect of the new curing technique on the carbon fibre prepreg material properties and the process potential to reduce the manufacturing costs is envisaged. The cure cycle time was reduced by 60% compared to the conventional heating process. Test results indicated that the degree of cure, glass transition temperature and interlaminar shear strength were in the range of the conventional curing process values.

KW - Carbon fibre

KW - Component

KW - Composite

KW - Dielectric heating

KW - Epoxy

KW - Out-of-autoclave curing

KW - Radiofrequency

UR - https://www.scopus.com/pages/publications/84907031440

M3 - Conference contribution

AN - SCOPUS:84907031440

SN - 9782854289787

T3 - Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011

SP - 207

EP - 210

BT - Microwave and RF Power Applications

PB - Editions Cepadues

T2 - 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011

Y2 - 5 September 2011 through 8 September 2011

ER -

Azurmendi N , Canflanca B , Caro I, Ávila R. Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating. En Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011. Editions Cepadues. 2011. p. 207-210. (Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011).

Comparison of the mechanical and physical properties of a carbon fibre epoxy composite cured by conventional heating and radiofrequency heating

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Otros archivos y enlaces

Huella

Citar esto