Design and performance of masonry mortars made with recycled concrete aggregates

Título traducido de la contribución: Diseño y prestaciones de morteros de albañilería elaborados con áridos reciclados procedentes de escombro de hormigón

I. Vegas*, I. Azkarate, A. Juarrero, M. Frías

*Autor correspondiente de este trabajo

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

95 Citas (Scopus)

Resumen

The present paper discusses the technical feasibility of using the fine fraction of recycled aggregate from concrete rubble to manufacture cement mortar and possible conditions. An initial study of the chemical and physical-mechanical characteristics of fines recycled from selected concrete showed that their high absorptivity and high sulfate content compared to natural limestone sands were the limiting factors to their in masonry mortars. As in the case of structural concrete, a blend of recycled and natural aggregate would appear to be suitable for masonry mortars. A study of the mix proportions and characteristics of mortars made with recycled concrete aggregate showed that up to 25% recycled aggregate can be used in cement-based masonry mortars with no significant decline in performance and no new admixtures or higher cement content requires.

Título traducido de la contribuciónDiseño y prestaciones de morteros de albañilería elaborados con áridos reciclados procedentes de escombro de hormigón
Idioma originalInglés
Páginas (desde-hasta)5-18
Número de páginas14
PublicaciónMateriales de Construccion
Volumen59
N.º295
DOI
EstadoPublicada - 2009

Huella

Profundice en los temas de investigación de 'Diseño y prestaciones de morteros de albañilería elaborados con áridos reciclados procedentes de escombro de hormigón'. En conjunto forman una huella única.

Citar esto