TY - GEN
T1 - Development of Powder Injection Moulding Process of Cobalt Free Diamond Composite for Cutting Tool Applications
AU - Agote, I.
AU - Guraya, C.
AU - Colella, A.
AU - Nicolis, E.
AU - Dai Prè, M.
N1 - Publisher Copyright:
© European Powder Metallurgy Association (EPMA)
PY - 2020
Y1 - 2020
N2 - Nowadays, diamond blades and wires are commonly used for sawing natural stone, concrete and ceramics. The cutting section of the tool consists of synthetic diamond crystals embedded in a metallic matrix, obtained using powder metallurgical (PM) routes: the most common route includes the hot pressing of the composite to obtain a fully dense part. This process has some limitations in terms of achievable part geometrical complexity and process productivity. In addition, the most commonly used metallic matrix is cobalt, which besides its proven high toxicological risk (REACH legislation), it is considered as a critical raw material (CRM) by the European Union. The present work has a twofold objective: from one side the substitution of cobalt by other non-toxic elements, and at the same time, the development of a powder injection moulding process to allow obtaining more complex shape parts (thus improving their performance) and increasing the process productivity.
AB - Nowadays, diamond blades and wires are commonly used for sawing natural stone, concrete and ceramics. The cutting section of the tool consists of synthetic diamond crystals embedded in a metallic matrix, obtained using powder metallurgical (PM) routes: the most common route includes the hot pressing of the composite to obtain a fully dense part. This process has some limitations in terms of achievable part geometrical complexity and process productivity. In addition, the most commonly used metallic matrix is cobalt, which besides its proven high toxicological risk (REACH legislation), it is considered as a critical raw material (CRM) by the European Union. The present work has a twofold objective: from one side the substitution of cobalt by other non-toxic elements, and at the same time, the development of a powder injection moulding process to allow obtaining more complex shape parts (thus improving their performance) and increasing the process productivity.
UR - https://www.scopus.com/pages/publications/85125088106
M3 - Conference contribution
AN - SCOPUS:85125088106
T3 - Proceedings - Euro PM2020 Congress and Exhibition
BT - Proceedings - Euro PM2020 Congress and Exhibition
PB - European Powder Metallurgy Association (EPMA)
T2 - European Powder Metallurgy Congress and Exhibition, Euro PM 2020
Y2 - 5 October 2020 through 7 October 2020
ER -