Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel

Jacek Jagielski; A. S. Khanna; Jacek Kucinski; D. S. Mishra; P. Racolta; Piran Sioshansi; Eric Tobin; J. Thereska; Vladimir Uglov; T. Vilaithong; J. Viviente; Si Ze Yang; Anton Zalar

doi:10.1016/S0169-4332(99)00350-5

Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel

Jacek Jagielski
, A. S. Khanna
, Jacek Kucinski
, D. S. Mishra
, P. Racolta
, Piran Sioshansi
, Eric Tobin
, J. Thereska
, Vladimir Uglov
, T. Vilaithong
, J. Viviente
, Si Ze Yang
, Anton Zalar

Tecnología de membranas e intensificación de procesos

Institute of Microelectronics and Photonics
Indian Institute of Technology Bombay
Institute of Atomic Energy
Horia Hulubei National Institute of Physics and Nuclear Engineering
Radio-Med
Spire
Division of Physical and Chemical Sciences
Belarusian State University
Chiang Mai University
CAS - Institute of Physics
Institute of Surface Engineering and Optoelectronics

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

87 Citas (Scopus)

Resumen

Ion beam-assisted deposition (IBAD) technique has been used to deposit chromium nitride on the stainless steel substrates. Characterization and performance of this coating was carried out by a round-robin test at various laboratories. About 300 samples, prepared at Spire, USA, were distributed to 10 different laboratories. Characterization of coated materials, carried out using Rutherford backscattering (RBS), X-ray diffraction (XRD), glancing X-ray diffraction, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), confirmed a well-adherent layer of chromium nitride with composition and thickness of Cr_0.8N_0.2 and 1.2 μm, respectively. The performance of the coating was tested by tribological tests: dynamic micro-indentation, micro-hardness, wear and friction, and corrosion tests. The coating was found to be hard with good wear resistance and had enhanced resistance to corrosion in acid media.

Idioma original	Inglés
Páginas (desde-hasta)	47-64
Número de páginas	18
Publicación	Applied Surface Science
Volumen	156
N.º	1
DOI	https://doi.org/10.1016/S0169-4332(99)00350-5
Estado	Publicada - 2 feb 2000

Acceder al documento

10.1016/S0169-4332(99)00350-5

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@article{2ff7a125f1ba4c5ea945467daf0bed8e,

title = "Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel",

abstract = "Ion beam-assisted deposition (IBAD) technique has been used to deposit chromium nitride on the stainless steel substrates. Characterization and performance of this coating was carried out by a round-robin test at various laboratories. About 300 samples, prepared at Spire, USA, were distributed to 10 different laboratories. Characterization of coated materials, carried out using Rutherford backscattering (RBS), X-ray diffraction (XRD), glancing X-ray diffraction, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), confirmed a well-adherent layer of chromium nitride with composition and thickness of Cr0.8N0.2 and 1.2 μm, respectively. The performance of the coating was tested by tribological tests: dynamic micro-indentation, micro-hardness, wear and friction, and corrosion tests. The coating was found to be hard with good wear resistance and had enhanced resistance to corrosion in acid media.",

author = "Jacek Jagielski and Khanna, \{A. S.\} and Jacek Kucinski and Mishra, \{D. S.\} and P. Racolta and Piran Sioshansi and Eric Tobin and J. Thereska and Vladimir Uglov and T. Vilaithong and J. Viviente and Yang, \{Si Ze\} and Anton Zalar",

year = "2000",

month = feb,

day = "2",

doi = "10.1016/S0169-4332(99)00350-5",

language = "English",

volume = "156",

pages = "47--64",

journal = "Applied Surface Science",

issn = "0169-4332",

publisher = "Elsevier",

number = "1",

}

TY - JOUR

T1 - Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel

AU - Jagielski, Jacek

AU - Khanna, A. S.

AU - Kucinski, Jacek

AU - Mishra, D. S.

AU - Racolta, P.

AU - Sioshansi, Piran

AU - Tobin, Eric

AU - Thereska, J.

AU - Uglov, Vladimir

AU - Vilaithong, T.

AU - Viviente, J.

AU - Yang, Si Ze

AU - Zalar, Anton

PY - 2000/2/2

Y1 - 2000/2/2

N2 - Ion beam-assisted deposition (IBAD) technique has been used to deposit chromium nitride on the stainless steel substrates. Characterization and performance of this coating was carried out by a round-robin test at various laboratories. About 300 samples, prepared at Spire, USA, were distributed to 10 different laboratories. Characterization of coated materials, carried out using Rutherford backscattering (RBS), X-ray diffraction (XRD), glancing X-ray diffraction, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), confirmed a well-adherent layer of chromium nitride with composition and thickness of Cr0.8N0.2 and 1.2 μm, respectively. The performance of the coating was tested by tribological tests: dynamic micro-indentation, micro-hardness, wear and friction, and corrosion tests. The coating was found to be hard with good wear resistance and had enhanced resistance to corrosion in acid media.

AB - Ion beam-assisted deposition (IBAD) technique has been used to deposit chromium nitride on the stainless steel substrates. Characterization and performance of this coating was carried out by a round-robin test at various laboratories. About 300 samples, prepared at Spire, USA, were distributed to 10 different laboratories. Characterization of coated materials, carried out using Rutherford backscattering (RBS), X-ray diffraction (XRD), glancing X-ray diffraction, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), confirmed a well-adherent layer of chromium nitride with composition and thickness of Cr0.8N0.2 and 1.2 μm, respectively. The performance of the coating was tested by tribological tests: dynamic micro-indentation, micro-hardness, wear and friction, and corrosion tests. The coating was found to be hard with good wear resistance and had enhanced resistance to corrosion in acid media.

UR - https://www.scopus.com/pages/publications/17744413509

U2 - 10.1016/S0169-4332(99)00350-5

DO - 10.1016/S0169-4332(99)00350-5

M3 - Article

AN - SCOPUS:17744413509

SN - 0169-4332

VL - 156

SP - 47

EP - 64

JO - Applied Surface Science

JF - Applied Surface Science

IS - 1

ER -

Effect of chromium nitride coating on the corrosion and wear resistance of stainless steel

Resumen

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto