Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies

Javier Delgado; Jose Ramon Blasco; Luis Portoles; Javier Ferris; Esther Hurtos; Garbine Atorrasagasti

Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies

Javier Delgado, Jose Ramon Blasco, Luis Portoles, Javier Ferris, Esther Hurtos, Garbine Atorrasagasti

Biomateriales

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

5 Citas (Scopus)

Resumen

A goal in clinical practice is the total adaptation and personalization of medical devices to the special needs of the patient. Customization will be the best way to satisfy higher levels of quality, functionality, safety and biocompatibility during surgical treatment. Additive manufacturing technologies become the best alternative to produce customized medical devices. The FABIO project was proposed to develop new biomaterials and to adapt additive manufacturing technologies to obtain a new generation of customized medical devices. Four customized prototypes were designed, additively manufactured and validated within the project. Results have enabled the marketing of customized medical devices with high added value, great competitiveness and good levels of quality, functionality, safety and biocompatibility, in order to increase the satisfaction of the patient.

Idioma original	Inglés
Título de la publicación alojada	Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation
Subtítulo de la publicación alojada	Focus on Interdisciplinary Solutions"
Editorial	Danube Adria Association for Automation and Manufacturing, DAAAM
Páginas	1541-1542
Número de páginas	2
ISBN (versión impresa)	9783901509735
Estado	Publicada - 2010
Evento	Annals of DAAAM for 2010 and 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions" - Zadar, Croacia Duración: 20 oct 2010 → 23 oct 2010

Serie de la publicación

Nombre	Annals of DAAAM and Proceedings of the International DAAAM Symposium
ISSN (versión impresa)	1726-9679

Conferencia

Conferencia	Annals of DAAAM for 2010 and 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions"
País/Territorio	Croacia
Ciudad	Zadar
Período	20/10/10 → 23/10/10

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Delgado, J., Blasco, J. R., Portoles, L., Ferris, J., Hurtos, E., & Atorrasagasti, G. (2010). Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies. En Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions" (pp. 1541-1542). (Annals of DAAAM and Proceedings of the International DAAAM Symposium). Danube Adria Association for Automation and Manufacturing, DAAAM.

Delgado, Javier ; Blasco, Jose Ramon ; Portoles, Luis et al. / Fabio project : Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies. Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, 2010. pp. 1541-1542 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).

@inproceedings{228b6efcbf0244a68d9aa41b7b016922,

title = "Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies",

abstract = "A goal in clinical practice is the total adaptation and personalization of medical devices to the special needs of the patient. Customization will be the best way to satisfy higher levels of quality, functionality, safety and biocompatibility during surgical treatment. Additive manufacturing technologies become the best alternative to produce customized medical devices. The FABIO project was proposed to develop new biomaterials and to adapt additive manufacturing technologies to obtain a new generation of customized medical devices. Four customized prototypes were designed, additively manufactured and validated within the project. Results have enabled the marketing of customized medical devices with high added value, great competitiveness and good levels of quality, functionality, safety and biocompatibility, in order to increase the satisfaction of the patient.",

keywords = "Additive Manufacturing, Biocompatibility, Customized medical devices, Prosthesis",

author = "Javier Delgado and Blasco, {Jose Ramon} and Luis Portoles and Javier Ferris and Esther Hurtos and Garbine Atorrasagasti",

year = "2010",

language = "English",

isbn = "9783901509735",

series = "Annals of DAAAM and Proceedings of the International DAAAM Symposium",

publisher = "Danube Adria Association for Automation and Manufacturing, DAAAM",

pages = "1541--1542",

booktitle = "Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium {"}Intelligent Manufacturing and Automation",

note = "Annals of DAAAM for 2010 and 21st International DAAAM Symposium {"}Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions{"} ; Conference date: 20-10-2010 Through 23-10-2010",

}

Delgado, J, Blasco, JR, Portoles, L, Ferris, J, Hurtos, E & Atorrasagasti, G 2010, Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies. En Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Annals of DAAAM and Proceedings of the International DAAAM Symposium, Danube Adria Association for Automation and Manufacturing, DAAAM, pp. 1541-1542, Annals of DAAAM for 2010 and 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions", Zadar, Croacia, 20/10/10.

Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies. / Delgado, Javier; Blasco, Jose Ramon; Portoles, Luis et al.
Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, 2010. p. 1541-1542 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Fabio project

T2 - Annals of DAAAM for 2010 and 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions"

AU - Delgado, Javier

AU - Blasco, Jose Ramon

AU - Portoles, Luis

AU - Ferris, Javier

AU - Hurtos, Esther

AU - Atorrasagasti, Garbine

PY - 2010

Y1 - 2010

N2 - A goal in clinical practice is the total adaptation and personalization of medical devices to the special needs of the patient. Customization will be the best way to satisfy higher levels of quality, functionality, safety and biocompatibility during surgical treatment. Additive manufacturing technologies become the best alternative to produce customized medical devices. The FABIO project was proposed to develop new biomaterials and to adapt additive manufacturing technologies to obtain a new generation of customized medical devices. Four customized prototypes were designed, additively manufactured and validated within the project. Results have enabled the marketing of customized medical devices with high added value, great competitiveness and good levels of quality, functionality, safety and biocompatibility, in order to increase the satisfaction of the patient.

AB - A goal in clinical practice is the total adaptation and personalization of medical devices to the special needs of the patient. Customization will be the best way to satisfy higher levels of quality, functionality, safety and biocompatibility during surgical treatment. Additive manufacturing technologies become the best alternative to produce customized medical devices. The FABIO project was proposed to develop new biomaterials and to adapt additive manufacturing technologies to obtain a new generation of customized medical devices. Four customized prototypes were designed, additively manufactured and validated within the project. Results have enabled the marketing of customized medical devices with high added value, great competitiveness and good levels of quality, functionality, safety and biocompatibility, in order to increase the satisfaction of the patient.

KW - Additive Manufacturing

KW - Biocompatibility

KW - Customized medical devices

KW - Prosthesis

UR - http://www.scopus.com/inward/record.url?scp=84904438494&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84904438494

SN - 9783901509735

T3 - Annals of DAAAM and Proceedings of the International DAAAM Symposium

SP - 1541

EP - 1542

BT - Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation

PB - Danube Adria Association for Automation and Manufacturing, DAAAM

Y2 - 20 October 2010 through 23 October 2010

ER -

Delgado J, Blasco JR, Portoles L, Ferris J, Hurtos E, Atorrasagasti G. Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies. En Annals of DAAAM for 2010 and Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Interdisciplinary Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM. 2010. p. 1541-1542. (Annals of DAAAM and Proceedings of the International DAAAM Symposium).

Fabio project: Development of innovative customized medical devices through new biomaterials and additive manufacturing technologies

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Otros archivos y enlaces

Huella

Citar esto