Fast method for slag characterization during ladle furnace steelmaking process based on spectral reflectance

A. Vicente, Inaki Macaya, Artzai Picon, Jose Antonio Arteche

Producción científica: Contribución a una conferenciaArtículorevisión exhaustiva

Resumen

Hyperspectral imaging reflectance analysis has proven to be successful in online characterization applications such as material recycling [1], soil composition analysis [2], quality control [3] among others. The measurement of a narrow spectral reflectance of specific materials allows the use of feature extraction and regression machine learning techniques to classify the material into a specific group or estimate some chemical parameters under controlled conditions. A method for Fast slag composition estimation on the ladle furnace process, together with the steel composition information from in-process steel spectrometers, would allow implementing thermo-dynamical equilibrium models to optimize the use of steel additives to obtain a target steel grade at the optimal additive cost. In this work, we present a fast method for slag characterization which is based on the indirect analysis of the spectral reflectance of the slag. This method is based on a normalization procedure to remove the specular component of the spectra, a calibration method to correct lighting conditions and a spectral feature extraction algorithm combined with a SVr (Support vector regression) based regression method. A system consisting of a hyperspectral imaging system and a calibration method has been constructed. The system has been trained with more than 600 real slag samples taken from ladle furnace at different ArcelorMittal steel plants. In order to cover the whole slag oxidation process, three slag samples were taken at each heat. Each sample was analysed by XRF spectroscopy and the regression system was trained to map the values for CaO, SiO2, .S, FeO, MnO Al2O3, MgO, P2O5 obtaining composition errors below 10% on the calibrated ladle furnace oxidation process. The estimated slag composition was used to feed a thermo-dynamical equilibrium model that, together with the steel composition from the in-process spectrometer estimates the required additives for the specific steel grade. This showed lower additive costs than manual additive estimation with equivalent final steel quality.
Idioma originalInglés
EstadoPublicada - 2017

Palabras clave

  • Ladle furnace
  • Slag characterization
  • Spectral reflectance
  • Hyperspectral imaging reflectance

Project and Funding Information

  • Funding Info
  • Partial financial support of this work by the Basque Government (Etorgai NUPROSS_x000D_ ER-2010/00001 and DAVOS ER-2014/0004 Projects) is gratefully acknowledged.

Huella

Profundice en los temas de investigación de 'Fast method for slag characterization during ladle furnace steelmaking process based on spectral reflectance'. En conjunto forman una huella única.

Citar esto