Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

Implementation of an electrical micro-grid through matrix converters connected in parallel

  • Estefanía Planas*
  • , Edorta Ibarra
  • , Enekoitz Ormaetxea
  • , Jon Andreu
  • , Igor Gabiolay
  • *Autor correspondiente de este trabajo

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

5 Citas (Scopus)

Resumen

The matrix converter (MC) arouses a growing interest because it provides many advantages. On the other hand, the association of these converters in parallel makes the operation of the system operation more reliable and offers the possibility of creating electrical micro-grids. This article presents a parallel association of MCs by droop parallelization technique, which allows the control of several parallel MCs without needing communication between them. This configuration also offers the possibility to achieve an even load sharing. The obtained results demonstrate the feasibility of this technique.

Idioma originalInglés
Título de la publicación alojadaProceedings of EPE-PEMC 2010 - 14th International Power Electronics and Motion Control Conference
PáginasT3137-T3142
DOI
EstadoPublicada - 2010
Evento14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010 - Ohrid, Antigua República Yugoslava de Macedonia
Duración: 6 sept 20108 sept 2010

Serie de la publicación

NombreProceedings of EPE-PEMC 2010 - 14th International Power Electronics and Motion Control Conference

Conferencia

Conferencia14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010
País/TerritorioAntigua República Yugoslava de Macedonia
CiudadOhrid
Período6/09/108/09/10

Huella

Profundice en los temas de investigación de 'Implementation of an electrical micro-grid through matrix converters connected in parallel'. En conjunto forman una huella única.

Citar esto