Influence of the injection pressure and crucible-wheel distance on the amorphous state in the Fe73.5Ta3Cu1Si13.5B9 alloy

N. Murillo; F. Leccabue; B. E. Watts; P. Marín; M. Vázquez; J. González; J. M. Barandiarán

doi:100000/000

Influence of the injection pressure and crucible-wheel distance on the amorphous state in the Fe_73.5Ta₃Cu¹Si_13.5B₉ alloy

N. Murillo^*
, F. Leccabue
, B. E. Watts
, P. Marín
, M. Vázquez
, J. González
, J. M. Barandiarán

^*Autor correspondiente de este trabajo

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

Resumen

The effect of the fabrication parameters, namely the injection pressure and crucible-wheel distance, on the amorphous and nanocrystalline state of the Fe_73.5Ta₃Cu₁Si_13.5B₉ alloy, obtained by melt spinning, has been analysed by measuring the influence of those parameters on the magnetic properties: coercivity, magnetisation work and saturation magnetostriction. The different nanocrystalline alloys obtained by subsequent thermal treatments show an improvement of the soft magnetic behaviour. Such an improvement depends significantly on the fabrication parameters of the precursor amorphous material.

Idioma original	Inglés
Páginas (desde-hasta)	303-308
Número de páginas	6
Publicación	Materials Science Forum
Volumen	235-238
N.º	PART 1
DOI	https://doi.org/100000/000
Estado	Publicada - 1997
Publicado de forma externa	Sí

Acceder al documento

100000/000

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@article{faabf96a4b51402ea8629db7862b030f,

title = "Influence of the injection pressure and crucible-wheel distance on the amorphous state in the Fe73.5Ta3Cu1Si13.5B9 alloy",

abstract = "The effect of the fabrication parameters, namely the injection pressure and crucible-wheel distance, on the amorphous and nanocrystalline state of the Fe73.5Ta3Cu1Si13.5B9 alloy, obtained by melt spinning, has been analysed by measuring the influence of those parameters on the magnetic properties: coercivity, magnetisation work and saturation magnetostriction. The different nanocrystalline alloys obtained by subsequent thermal treatments show an improvement of the soft magnetic behaviour. Such an improvement depends significantly on the fabrication parameters of the precursor amorphous material.",

keywords = "Melt spinning, Nanocrystallisation, Soft magnetic materials, Tantalum",

author = "N. Murillo and F. Leccabue and Watts, \{B. E.\} and P. Mar{\'i}n and M. V{\'a}zquez and J. Gonz{\'a}lez and Barandiar{\'a}n, \{J. M.\}",

year = "1997",

doi = "100000/000",

language = "English",

volume = "235-238",

pages = "303--308",

journal = "Materials Science Forum",

issn = "0255-5476",

publisher = "Trans Tech Publications",

number = "PART 1",

}

TY - JOUR

T1 - Influence of the injection pressure and crucible-wheel distance on the amorphous state in the Fe73.5Ta3Cu1Si13.5B9 alloy

AU - Murillo, N.

AU - Leccabue, F.

AU - Watts, B. E.

AU - Marín, P.

AU - Vázquez, M.

AU - González, J.

AU - Barandiarán, J. M.

PY - 1997

Y1 - 1997

N2 - The effect of the fabrication parameters, namely the injection pressure and crucible-wheel distance, on the amorphous and nanocrystalline state of the Fe73.5Ta3Cu1Si13.5B9 alloy, obtained by melt spinning, has been analysed by measuring the influence of those parameters on the magnetic properties: coercivity, magnetisation work and saturation magnetostriction. The different nanocrystalline alloys obtained by subsequent thermal treatments show an improvement of the soft magnetic behaviour. Such an improvement depends significantly on the fabrication parameters of the precursor amorphous material.

AB - The effect of the fabrication parameters, namely the injection pressure and crucible-wheel distance, on the amorphous and nanocrystalline state of the Fe73.5Ta3Cu1Si13.5B9 alloy, obtained by melt spinning, has been analysed by measuring the influence of those parameters on the magnetic properties: coercivity, magnetisation work and saturation magnetostriction. The different nanocrystalline alloys obtained by subsequent thermal treatments show an improvement of the soft magnetic behaviour. Such an improvement depends significantly on the fabrication parameters of the precursor amorphous material.

KW - Melt spinning

KW - Nanocrystallisation

KW - Soft magnetic materials

KW - Tantalum

UR - https://www.scopus.com/pages/publications/3743091503

U2 - 100000/000

DO - 100000/000

M3 - Article

AN - SCOPUS:3743091503

SN - 0255-5476

VL - 235-238

SP - 303

EP - 308

JO - Materials Science Forum

JF - Materials Science Forum

IS - PART 1