Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

Laser texturing of ZnO:Al front contact for efficiency enhancement in thin-film silicon solar cells

  • D. Canteli
  • , S. Fernandez
  • , J. D. Santos
  • , J. P. Gonzalez
  • , C. Molpeceres
  • , I. Torres
  • , J. Carabe
  • , J. J. Gandia
  • CIEMAT
  • Technical University of Madrid

Producción científica: Contribución a una conferenciaArtículorevisión exhaustiva

Resumen

A significant portion of the efficiency losses in amorphous silicon (a-Si) p-i-n solar cells is due to the light reflected on the device surface or not absorbed within the intrinsic layer. One way to reduce these optical losses is the texturing of the transparent conductive oxide (TCO) on glass usually used as substrate (for a superstrate configuration). The scattering produced on the TCO surface results in a lower percentage of reflected light on the TCO/p-a-Si interface and a higher amount of captured light in the device absorber [1].

Idioma originalInglés
DOI
EstadoPublicada - 2013
Publicado de forma externa
Evento2013 Conference on Lasers and Electro-Optics Europe and International Quantum Electronics Conference, CLEO/Europe-IQEC 2013 - Munich, Alemania
Duración: 12 may 201316 may 2013

Conferencia

Conferencia2013 Conference on Lasers and Electro-Optics Europe and International Quantum Electronics Conference, CLEO/Europe-IQEC 2013
País/TerritorioAlemania
CiudadMunich
Período12/05/1316/05/13

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

  1. ODS 7: Energía asequible y no contaminante
    ODS 7: Energía asequible y no contaminante

Huella

Profundice en los temas de investigación de 'Laser texturing of ZnO:Al front contact for efficiency enhancement in thin-film silicon solar cells'. En conjunto forman una huella única.

Citar esto