MV Cable Modeling for Application in the Digital Twin of a Windfarm

O. Oñederra; F. J. Asensio; P. Eguia; E. Perea; A. Pujana; L. Martinez

doi:10.1109/ICCEP.2019.8890166

MV Cable Modeling for Application in the Digital Twin of a Windfarm

O. Oñederra
, F. J. Asensio
, P. Eguia
, E. Perea
, A. Pujana
, L. Martinez

Fundación TECNALIA Research & Innovation

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

25 Citas (Scopus)

Resumen

The digital models of windfarms provide a useful tool when monitoring and controlling wind generators digitally and remotely, allowing its maintenance and optimization, thus reducing the costs due to downtime and increasing the reliability of the elements that intervene in the conversion of wind energy to electric power. These aspects acquire even greater relevance when it comes to remote locations such as offshore wind farms. In this sense, this paper describes a MV cable model aimed at emulating its behavior and lifetime in order to carry out a preventive maintenance. The model is based on a combination of a dynamic MV cable model and a PCHIP-based interpolation algorithm, which have been developed in open source software OpenModelica.

Idioma original	Inglés
Título de la publicación alojada	ICCEP 2019 - 7th International Conference on Clean Electrical Power
Subtítulo de la publicación alojada	Renewable Energy Resources Impact
Editorial	Institute of Electrical and Electronics Engineers Inc.
Páginas	617-622
Número de páginas	6
ISBN (versión digital)	9781728113562
DOI	https://doi.org/10.1109/ICCEP.2019.8890166
Estado	Publicada - jul 2019
Evento	7th International Conference on Clean Electrical Power, ICCEP 2019 - Otranto, Italia Duración: 2 jul 2019 → 4 jul 2019

Serie de la publicación

Nombre	ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact

Conferencia

Conferencia	7th International Conference on Clean Electrical Power, ICCEP 2019
País/Territorio	Italia
Ciudad	Otranto
Período	2/07/19 → 4/07/19

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante

Acceder al documento

10.1109/ICCEP.2019.8890166

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Oñederra, O., Asensio, F. J., Eguia, P., Perea, E., Pujana, A., & Martinez, L. (2019). MV Cable Modeling for Application in the Digital Twin of a Windfarm. En ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact (pp. 617-622). Artículo 8890166 (ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCEP.2019.8890166

Oñederra, O. ; Asensio, F. J. ; Eguia, P. et al. / MV Cable Modeling for Application in the Digital Twin of a Windfarm. ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 617-622 (ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact).

@inproceedings{f0995738f2a64d3f9508eb9b865a1537,

title = "MV Cable Modeling for Application in the Digital Twin of a Windfarm",

abstract = "The digital models of windfarms provide a useful tool when monitoring and controlling wind generators digitally and remotely, allowing its maintenance and optimization, thus reducing the costs due to downtime and increasing the reliability of the elements that intervene in the conversion of wind energy to electric power. These aspects acquire even greater relevance when it comes to remote locations such as offshore wind farms. In this sense, this paper describes a MV cable model aimed at emulating its behavior and lifetime in order to carry out a preventive maintenance. The model is based on a combination of a dynamic MV cable model and a PCHIP-based interpolation algorithm, which have been developed in open source software OpenModelica.",

keywords = "cable, digital twin, modelling, remaining lifetime",

author = "O. O{\~n}ederra and Asensio, \{F. J.\} and P. Eguia and E. Perea and A. Pujana and L. Martinez",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 7th International Conference on Clean Electrical Power, ICCEP 2019 ; Conference date: 02-07-2019 Through 04-07-2019",

year = "2019",

month = jul,

doi = "10.1109/ICCEP.2019.8890166",

language = "English",

series = "ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "617--622",

booktitle = "ICCEP 2019 - 7th International Conference on Clean Electrical Power",

address = "United States",

}

Oñederra, O, Asensio, FJ, Eguia, P, Perea, E , Pujana, A & Martinez, L 2019, MV Cable Modeling for Application in the Digital Twin of a Windfarm. En ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact., 8890166, ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact, Institute of Electrical and Electronics Engineers Inc., pp. 617-622, 7th International Conference on Clean Electrical Power, ICCEP 2019, Otranto, Italia, 2/07/19. https://doi.org/10.1109/ICCEP.2019.8890166

MV Cable Modeling for Application in the Digital Twin of a Windfarm. / Oñederra, O.; Asensio, F. J.; Eguia, P. et al.
ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact. Institute of Electrical and Electronics Engineers Inc., 2019. p. 617-622 8890166 (ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - MV Cable Modeling for Application in the Digital Twin of a Windfarm

AU - Oñederra, O.

AU - Asensio, F. J.

AU - Eguia, P.

AU - Perea, E.

AU - Pujana, A.

AU - Martinez, L.

PY - 2019/7

Y1 - 2019/7

N2 - The digital models of windfarms provide a useful tool when monitoring and controlling wind generators digitally and remotely, allowing its maintenance and optimization, thus reducing the costs due to downtime and increasing the reliability of the elements that intervene in the conversion of wind energy to electric power. These aspects acquire even greater relevance when it comes to remote locations such as offshore wind farms. In this sense, this paper describes a MV cable model aimed at emulating its behavior and lifetime in order to carry out a preventive maintenance. The model is based on a combination of a dynamic MV cable model and a PCHIP-based interpolation algorithm, which have been developed in open source software OpenModelica.

AB - The digital models of windfarms provide a useful tool when monitoring and controlling wind generators digitally and remotely, allowing its maintenance and optimization, thus reducing the costs due to downtime and increasing the reliability of the elements that intervene in the conversion of wind energy to electric power. These aspects acquire even greater relevance when it comes to remote locations such as offshore wind farms. In this sense, this paper describes a MV cable model aimed at emulating its behavior and lifetime in order to carry out a preventive maintenance. The model is based on a combination of a dynamic MV cable model and a PCHIP-based interpolation algorithm, which have been developed in open source software OpenModelica.

KW - cable

KW - digital twin

KW - modelling

KW - remaining lifetime

UR - https://www.scopus.com/pages/publications/85075359740

U2 - 10.1109/ICCEP.2019.8890166

DO - 10.1109/ICCEP.2019.8890166

M3 - Conference contribution

AN - SCOPUS:85075359740

T3 - ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact

SP - 617

EP - 622

BT - ICCEP 2019 - 7th International Conference on Clean Electrical Power

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th International Conference on Clean Electrical Power, ICCEP 2019

Y2 - 2 July 2019 through 4 July 2019

ER -

Oñederra O, Asensio FJ, Eguia P, Perea E , Pujana A, Martinez L. MV Cable Modeling for Application in the Digital Twin of a Windfarm. En ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact. Institute of Electrical and Electronics Engineers Inc. 2019. p. 617-622. 8890166. (ICCEP 2019 - 7th International Conference on Clean Electrical Power: Renewable Energy Resources Impact). doi: 10.1109/ICCEP.2019.8890166

MV Cable Modeling for Application in the Digital Twin of a Windfarm

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto