Parallel raster image processor for PCB manufacturing

J. L. Martin; G. Aranguren; J. Ezquerra; P. Ibanez; R. Lasure; J. Van Campenhout

Parallel raster image processor for PCB manufacturing

J. L. Martin^*
, G. Aranguren
, J. Ezquerra
, P. Ibanez
, R. Lasure
, J. Van Campenhout

^*Autor correspondiente de este trabajo

Producción científica: Contribución a una conferencia › Artículo › revisión exhaustiva

1 Cita (Scopus)

Resumen

The Printed Circuit Board (PCB) is the base most commonly used for building electronic circuits. The design of the PCB is usually done by means of an adequate CAD program. The files generated by CAD programs can have different formats [1] to describe printed circuit boards, but all formats essentially consist of the traces and the soldering pads that make up a PCB. The present paper describes a raster image processing system based on a parallel architecture aimed at the conversion of CAD files for making printed circuits using the 'direct imaging' technique [2], by means of a multiple laser beam plotter.

Idioma original	Inglés
Páginas	1184-1189
Número de páginas	6
Estado	Publicada - 1994
Publicado de forma externa	Sí
Evento	Proceedings of the 20th International Conference on Industrial Electronics, Control and Instrumentation. Part 1 (of 3) - Bologna, Italy Duración: 5 sept 1994 → 9 sept 1994

Conferencia

Conferencia	Proceedings of the 20th International Conference on Industrial Electronics, Control and Instrumentation. Part 1 (of 3)
Ciudad	Bologna, Italy
Período	5/09/94 → 9/09/94

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 9: Industria, innovación e infraestructura

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@conference{22bcdc2a99f44296a9df188299718af2,

title = "Parallel raster image processor for PCB manufacturing",

abstract = "The Printed Circuit Board (PCB) is the base most commonly used for building electronic circuits. The design of the PCB is usually done by means of an adequate CAD program. The files generated by CAD programs can have different formats [1] to describe printed circuit boards, but all formats essentially consist of the traces and the soldering pads that make up a PCB. The present paper describes a raster image processing system based on a parallel architecture aimed at the conversion of CAD files for making printed circuits using the 'direct imaging' technique [2], by means of a multiple laser beam plotter.",

author = "Martin, \{J. L.\} and G. Aranguren and J. Ezquerra and P. Ibanez and R. Lasure and \{Van Campenhout\}, J.",

year = "1994",

language = "English",

pages = "1184--1189",

note = "Proceedings of the 20th International Conference on Industrial Electronics, Control and Instrumentation. Part 1 (of 3) ; Conference date: 05-09-1994 Through 09-09-1994",

}

Parallel raster image processor for PCB manufacturing. / Martin, J. L.; Aranguren, G.; Ezquerra, J. et al.
1994. 1184-1189 Papel presentado en Proceedings of the 20th International Conference on Industrial Electronics, Control and Instrumentation. Part 1 (of 3), Bologna, Italy.

Producción científica: Contribución a una conferencia › Artículo › revisión exhaustiva

TY - CONF

T1 - Parallel raster image processor for PCB manufacturing

AU - Martin, J. L.

AU - Aranguren, G.

AU - Ezquerra, J.

AU - Ibanez, P.

AU - Lasure, R.

AU - Van Campenhout, J.

PY - 1994

Y1 - 1994

N2 - The Printed Circuit Board (PCB) is the base most commonly used for building electronic circuits. The design of the PCB is usually done by means of an adequate CAD program. The files generated by CAD programs can have different formats [1] to describe printed circuit boards, but all formats essentially consist of the traces and the soldering pads that make up a PCB. The present paper describes a raster image processing system based on a parallel architecture aimed at the conversion of CAD files for making printed circuits using the 'direct imaging' technique [2], by means of a multiple laser beam plotter.

AB - The Printed Circuit Board (PCB) is the base most commonly used for building electronic circuits. The design of the PCB is usually done by means of an adequate CAD program. The files generated by CAD programs can have different formats [1] to describe printed circuit boards, but all formats essentially consist of the traces and the soldering pads that make up a PCB. The present paper describes a raster image processing system based on a parallel architecture aimed at the conversion of CAD files for making printed circuits using the 'direct imaging' technique [2], by means of a multiple laser beam plotter.

UR - https://www.scopus.com/pages/publications/0028753836

M3 - Paper

AN - SCOPUS:0028753836

SP - 1184

EP - 1189

T2 - Proceedings of the 20th International Conference on Industrial Electronics, Control and Instrumentation. Part 1 (of 3)

Y2 - 5 September 1994 through 9 September 1994

ER -

Parallel raster image processor for PCB manufacturing

Resumen

Conferencia

ODS de las Naciones Unidas

Otros archivos y enlaces

Huella

Citar esto