Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)

J. M. Gallardo; J. M. Montes; Th Schubert; T. Weissgaerber; C. Andreouli; V. Oikonomou; L. Prakash; J. A. Calero; G. Abrivard; C. Guraya; M. A. Lagos; I. Agote

Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)

J. M. Gallardo
, J. M. Montes
, Th Schubert
, T. Weissgaerber
, C. Andreouli
, V. Oikonomou
, L. Prakash
, J. A. Calero
, G. Abrivard
, C. Guraya
, M. A. Lagos
, I. Agote

Extremat

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

Resumen

Cutting tools with improved properties and using a new processing method are being developed for both aerospace and automotive applications within EFFIPRO; an EC granted project. The aim of the project is to develop a new energy efficient sintering process for cutting tools production. This new method is based in Joule effect sintering process which allows extremely fast sintering cycles. This work presents the preliminary results obtained during the characterisation of materials obtained using different sintering processes. A comparison of samples obtained by Spark Plasma Sintering (SPS) and Electrical resistance Sintering (ERS) is reported. It was also found that the sintering conditions for ERS are strongly influenced by the electrical conductivity of the powders. Samples obtained by SPS and ERS show a microstructure and properties similar to commercial materials.

Idioma original	Inglés
Título de la publicación alojada	Euro PM 2014 Congress and Exhibition, Proceedings
Editorial	European Powder Metallurgy Association (EPMA)
ISBN (versión digital)	9781899072446
Estado	Publicada - 2014
Evento	Euro PM 2014 International Conference and Exhibition - Salzburg, Austria Duración: 21 sept 2014 → 24 sept 2014

Serie de la publicación

Nombre	Euro PM 2014 Congress and Exhibition, Proceedings

Conferencia

Conferencia	Euro PM 2014 International Conference and Exhibition
País/Territorio	Austria
Ciudad	Salzburg
Período	21/09/14 → 24/09/14

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Gallardo, J. M., Montes, J. M., Schubert, T., Weissgaerber, T., Andreouli, C., Oikonomou, V., Prakash, L., Calero, J. A., Abrivard, G., Guraya, C., Lagos, M. A., & Agote, I. (2014). Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS). En Euro PM 2014 Congress and Exhibition, Proceedings (Euro PM 2014 Congress and Exhibition, Proceedings). European Powder Metallurgy Association (EPMA).

@inproceedings{25eb3499033c41d0bfd97620c0b40257,

title = "Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)",

abstract = "Cutting tools with improved properties and using a new processing method are being developed for both aerospace and automotive applications within EFFIPRO; an EC granted project. The aim of the project is to develop a new energy efficient sintering process for cutting tools production. This new method is based in Joule effect sintering process which allows extremely fast sintering cycles. This work presents the preliminary results obtained during the characterisation of materials obtained using different sintering processes. A comparison of samples obtained by Spark Plasma Sintering (SPS) and Electrical resistance Sintering (ERS) is reported. It was also found that the sintering conditions for ERS are strongly influenced by the electrical conductivity of the powders. Samples obtained by SPS and ERS show a microstructure and properties similar to commercial materials.",

keywords = "Cutting tools, Electrical sintering, ERS, FAST, Tungsten carbide",

author = "Gallardo, \{J. M.\} and Montes, \{J. M.\} and Th Schubert and T. Weissgaerber and C. Andreouli and V. Oikonomou and L. Prakash and Calero, \{J. A.\} and G. Abrivard and C. Guraya and Lagos, \{M. A.\} and I. Agote",

year = "2014",

language = "English",

series = "Euro PM 2014 Congress and Exhibition, Proceedings",

publisher = "European Powder Metallurgy Association (EPMA)",

booktitle = "Euro PM 2014 Congress and Exhibition, Proceedings",

note = "Euro PM 2014 International Conference and Exhibition ; Conference date: 21-09-2014 Through 24-09-2014",

}

Gallardo, JM, Montes, JM, Schubert, T, Weissgaerber, T, Andreouli, C, Oikonomou, V, Prakash, L, Calero, JA, Abrivard, G, Guraya, C , Lagos, MA & Agote, I 2014, Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS). En Euro PM 2014 Congress and Exhibition, Proceedings. Euro PM 2014 Congress and Exhibition, Proceedings, European Powder Metallurgy Association (EPMA), Euro PM 2014 International Conference and Exhibition, Salzburg, Austria, 21/09/14.

Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS). / Gallardo, J. M.; Montes, J. M.; Schubert, Th et al.
Euro PM 2014 Congress and Exhibition, Proceedings. European Powder Metallurgy Association (EPMA), 2014. (Euro PM 2014 Congress and Exhibition, Proceedings).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)

AU - Gallardo, J. M.

AU - Montes, J. M.

AU - Schubert, Th

AU - Weissgaerber, T.

AU - Andreouli, C.

AU - Oikonomou, V.

AU - Prakash, L.

AU - Calero, J. A.

AU - Abrivard, G.

AU - Guraya, C.

AU - Lagos, M. A.

AU - Agote, I.

PY - 2014

Y1 - 2014

N2 - Cutting tools with improved properties and using a new processing method are being developed for both aerospace and automotive applications within EFFIPRO; an EC granted project. The aim of the project is to develop a new energy efficient sintering process for cutting tools production. This new method is based in Joule effect sintering process which allows extremely fast sintering cycles. This work presents the preliminary results obtained during the characterisation of materials obtained using different sintering processes. A comparison of samples obtained by Spark Plasma Sintering (SPS) and Electrical resistance Sintering (ERS) is reported. It was also found that the sintering conditions for ERS are strongly influenced by the electrical conductivity of the powders. Samples obtained by SPS and ERS show a microstructure and properties similar to commercial materials.

AB - Cutting tools with improved properties and using a new processing method are being developed for both aerospace and automotive applications within EFFIPRO; an EC granted project. The aim of the project is to develop a new energy efficient sintering process for cutting tools production. This new method is based in Joule effect sintering process which allows extremely fast sintering cycles. This work presents the preliminary results obtained during the characterisation of materials obtained using different sintering processes. A comparison of samples obtained by Spark Plasma Sintering (SPS) and Electrical resistance Sintering (ERS) is reported. It was also found that the sintering conditions for ERS are strongly influenced by the electrical conductivity of the powders. Samples obtained by SPS and ERS show a microstructure and properties similar to commercial materials.

KW - Cutting tools

KW - Electrical sintering

KW - ERS

KW - FAST

KW - Tungsten carbide

UR - https://www.scopus.com/pages/publications/84959262705

M3 - Conference contribution

AN - SCOPUS:84959262705

T3 - Euro PM 2014 Congress and Exhibition, Proceedings

BT - Euro PM 2014 Congress and Exhibition, Proceedings

PB - European Powder Metallurgy Association (EPMA)

T2 - Euro PM 2014 International Conference and Exhibition

Y2 - 21 September 2014 through 24 September 2014

ER -

Preliminary comparison of hardmetals obtained by SPS and by electrical resistance sintering (ERS)

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Otros archivos y enlaces

Huella

Citar esto