PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments

Elena Rico; Irene Huerta; Teodosio del Caño; Loreto Villada; Ángel Gallego; Vicente Velasco; Oihana Zubillaga; José María Vega de Seoane; Igor Arrizabalaga; Naiara Yurrita; Jon Aizpurua; Gorka Imbuluzketa; Francisco J. Cano

doi:10.1007/978-3-030-12804-3_4

PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments

Elena Rico
, Irene Huerta^*
, Teodosio del Caño
, Loreto Villada
, Ángel Gallego
, Vicente Velasco
, Oihana Zubillaga
, José María Vega de Seoane
, Igor Arrizabalaga
, Naiara Yurrita
, Jon Aizpurua
, Gorka Imbuluzketa
, Francisco J. Cano

^*Autor correspondiente de este trabajo

ONYX SOLAR ENERGY SL
Parque Científico y Tecnológico de Gipuzkoa

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

6 Citas (Scopus)

Resumen

PVCOM project has as objective the development of new solutions for the integration of PV technology in urban applications. Despite traditional glass-glass configuration, the use of composite materials for encapsulation is proposed because its high transparency, low weight and great integration possibilities. Four solutions, a solar table, a solar slate tile, a PV shelter and an electric vehicle roof are proposed. For each proposed application conceptual designs using c-Si and CIGS technologies are done. Conceptual designs are based on legal and end-user’s requirements and involved technologies limitations. More appropriated resin systems and PV system configuration have been also defined. Conceptual designs will be used as reference for the manufacturing of conceptual-proof specimens, testing and the detailed design of final prototypes.

Idioma original	Inglés
Título de la publicación alojada	Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers
Editores	Luis Hernández Callejo, Sergio Nesmachnow
Editorial	Springer Verlag
Páginas	38-52
Número de páginas	15
ISBN (versión impresa)	9783030128036
DOI	https://doi.org/10.1007/978-3-030-12804-3_4
Estado	Publicada - 2019
Evento	1st Ibero-American Congress of Smart Cities, ICSC-CITIES 2018 - Soria, Espana Duración: 26 sept 2018 → 27 sept 2018

Serie de la publicación

Nombre	Communications in Computer and Information Science
Volumen	978
ISSN (versión impresa)	1865-0929

Conferencia

Conferencia	1st Ibero-American Congress of Smart Cities, ICSC-CITIES 2018
País/Territorio	Espana
Ciudad	Soria
Período	26/09/18 → 27/09/18

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante
ODS 9: Industria, innovación e infraestructura

Acceder al documento

10.1007/978-3-030-12804-3_4

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Rico, E., Huerta, I., del Caño, T., Villada, L., Gallego, Á., Velasco, V., Zubillaga, O., Vega de Seoane, J. M., Arrizabalaga, I., Yurrita, N., Aizpurua, J., Imbuluzketa, G., & Cano, F. J. (2019). PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments. En L. Hernández Callejo, & S. Nesmachnow (Eds.), Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers (pp. 38-52). (Communications in Computer and Information Science; Vol. 978). Springer Verlag. https://doi.org/10.1007/978-3-030-12804-3_4

Rico, Elena ; Huerta, Irene ; del Caño, Teodosio et al. / PVCOM Project : Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments. Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers. editor / Luis Hernández Callejo ; Sergio Nesmachnow. Springer Verlag, 2019. pp. 38-52 (Communications in Computer and Information Science).

@inproceedings{0e665bc9bc67440ea070e5bef828664a,

title = "PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments",

abstract = "PVCOM project has as objective the development of new solutions for the integration of PV technology in urban applications. Despite traditional glass-glass configuration, the use of composite materials for encapsulation is proposed because its high transparency, low weight and great integration possibilities. Four solutions, a solar table, a solar slate tile, a PV shelter and an electric vehicle roof are proposed. For each proposed application conceptual designs using c-Si and CIGS technologies are done. Conceptual designs are based on legal and end-user{\textquoteright}s requirements and involved technologies limitations. More appropriated resin systems and PV system configuration have been also defined. Conceptual designs will be used as reference for the manufacturing of conceptual-proof specimens, testing and the detailed design of final prototypes.",

keywords = "BIPV, CIGS, Composite materials, Photovoltaic",

author = "Elena Rico and Irene Huerta and \{del Ca{\~n}o\}, Teodosio and Loreto Villada and {\'A}ngel Gallego and Vicente Velasco and Oihana Zubillaga and \{Vega de Seoane\}, \{Jos{\'e} Mar{\'i}a\} and Igor Arrizabalaga and Naiara Yurrita and Jon Aizpurua and Gorka Imbuluzketa and Cano, \{Francisco J.\}",

note = "Publisher Copyright: {\textcopyright} 2019, Springer Nature Switzerland AG.; 1st Ibero-American Congress of Smart Cities, ICSC-CITIES 2018 ; Conference date: 26-09-2018 Through 27-09-2018",

year = "2019",

doi = "10.1007/978-3-030-12804-3\_4",

language = "English",

isbn = "9783030128036",

series = "Communications in Computer and Information Science",

publisher = "Springer Verlag",

pages = "38--52",

editor = "\{Hern{\'a}ndez Callejo\}, Luis and Sergio Nesmachnow",

booktitle = "Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers",

address = "Germany",

}

Rico, E, Huerta, I, del Caño, T, Villada, L, Gallego, Á, Velasco, V, Zubillaga, O, Vega de Seoane, JM, Arrizabalaga, I , Yurrita, N , Aizpurua, J , Imbuluzketa, G & Cano, FJ 2019, PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments. En L Hernández Callejo & S Nesmachnow (eds.), Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers. Communications in Computer and Information Science, vol. 978, Springer Verlag, pp. 38-52, 1st Ibero-American Congress of Smart Cities, ICSC-CITIES 2018, Soria, Espana, 26/09/18. https://doi.org/10.1007/978-3-030-12804-3_4

PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments. / Rico, Elena; Huerta, Irene; del Caño, Teodosio et al.
Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers. ed. / Luis Hernández Callejo; Sergio Nesmachnow. Springer Verlag, 2019. p. 38-52 (Communications in Computer and Information Science; Vol. 978).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - PVCOM Project

T2 - 1st Ibero-American Congress of Smart Cities, ICSC-CITIES 2018

AU - Rico, Elena

AU - Huerta, Irene

AU - del Caño, Teodosio

AU - Villada, Loreto

AU - Gallego, Ángel

AU - Velasco, Vicente

AU - Zubillaga, Oihana

AU - Vega de Seoane, José María

AU - Arrizabalaga, Igor

AU - Yurrita, Naiara

AU - Aizpurua, Jon

AU - Imbuluzketa, Gorka

AU - Cano, Francisco J.

PY - 2019

Y1 - 2019

N2 - PVCOM project has as objective the development of new solutions for the integration of PV technology in urban applications. Despite traditional glass-glass configuration, the use of composite materials for encapsulation is proposed because its high transparency, low weight and great integration possibilities. Four solutions, a solar table, a solar slate tile, a PV shelter and an electric vehicle roof are proposed. For each proposed application conceptual designs using c-Si and CIGS technologies are done. Conceptual designs are based on legal and end-user’s requirements and involved technologies limitations. More appropriated resin systems and PV system configuration have been also defined. Conceptual designs will be used as reference for the manufacturing of conceptual-proof specimens, testing and the detailed design of final prototypes.

AB - PVCOM project has as objective the development of new solutions for the integration of PV technology in urban applications. Despite traditional glass-glass configuration, the use of composite materials for encapsulation is proposed because its high transparency, low weight and great integration possibilities. Four solutions, a solar table, a solar slate tile, a PV shelter and an electric vehicle roof are proposed. For each proposed application conceptual designs using c-Si and CIGS technologies are done. Conceptual designs are based on legal and end-user’s requirements and involved technologies limitations. More appropriated resin systems and PV system configuration have been also defined. Conceptual designs will be used as reference for the manufacturing of conceptual-proof specimens, testing and the detailed design of final prototypes.

KW - BIPV

KW - CIGS

KW - Composite materials

KW - Photovoltaic

UR - https://www.scopus.com/pages/publications/85062650846

U2 - 10.1007/978-3-030-12804-3_4

DO - 10.1007/978-3-030-12804-3_4

M3 - Conference contribution

AN - SCOPUS:85062650846

SN - 9783030128036

T3 - Communications in Computer and Information Science

SP - 38

EP - 52

BT - Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers

A2 - Hernández Callejo, Luis

A2 - Nesmachnow, Sergio

PB - Springer Verlag

Y2 - 26 September 2018 through 27 September 2018

ER -

Rico E, Huerta I, del Caño T, Villada L, Gallego Á, Velasco V et al. PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments. En Hernández Callejo L, Nesmachnow S, editores, Smart Cities - 1st Ibero-American Congress, ICSC-CITIES 2018, Revised Selected Papers. Springer Verlag. 2019. p. 38-52. (Communications in Computer and Information Science). doi: 10.1007/978-3-030-12804-3_4

PVCOM Project: Manufacture of PV Modules Encapsulated in Composite Materials for Integration in Urban Environments

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto