Reliability improvement of wind turbine control system based on standby redundancy

Marcantonio Catelani; Lorenzo Ciani; Gabriele Patrizi; Diego Galar

doi:10.1109/ISSE46696.2019.8984510

Reliability improvement of wind turbine control system based on standby redundancy

Marcantonio Catelani
, Lorenzo Ciani
, Gabriele Patrizi
, Diego Galar

TECNALIA Research & Innovation

University of Florence
Luleå University of Technology

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

4 Citas (Scopus)

Resumen

Reliability analysis is widely used in many industrial fields to predict the remaining life of complex systems by assessing their current health status. This paper deals with one of the best-known techniques for reliability analysis: the reliability block diagram. This method models the reliability of the system based on the system's architecture and the reliability of its components. The work analyses the control system of a 2MW wind turbine, proposing two different reliability models. The first draws on a standard control system architecture. The second introduces a cold standby redundancy architecture for the data acquisition subsystem and a warm standby redundancy architecture for the power supply subsystem. With these configurations, it is possible to improve the system reliability by neglecting some failure modes because one of the branches of the redundant configuration will be either inactive or partially active.

Idioma original	Inglés
Título de la publicación alojada	ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings
Editorial	Institute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)	9781728117836
DOI	https://doi.org/10.1109/ISSE46696.2019.8984510
Estado	Publicada - oct 2019
Evento	5th Annual IEEE International Symposium on Systems Engineering, ISSE 2019 - Edinburgh, Reino Unido Duración: 1 oct 2019 → 3 oct 2019

Serie de la publicación

Nombre	ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings

Conferencia

Conferencia	5th Annual IEEE International Symposium on Systems Engineering, ISSE 2019
País/Territorio	Reino Unido
Ciudad	Edinburgh
Período	1/10/19 → 3/10/19

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante

Acceder al documento

10.1109/ISSE46696.2019.8984510

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Catelani, M., Ciani, L., Patrizi, G., & Galar, D. (2019). Reliability improvement of wind turbine control system based on standby redundancy. En ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings Artículo 8984510 (ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISSE46696.2019.8984510

Catelani, Marcantonio ; Ciani, Lorenzo ; Patrizi, Gabriele et al. / Reliability improvement of wind turbine control system based on standby redundancy. ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. (ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings).

@inproceedings{5275506673bb4d398af9eb4e5443ad1d,

title = "Reliability improvement of wind turbine control system based on standby redundancy",

abstract = "Reliability analysis is widely used in many industrial fields to predict the remaining life of complex systems by assessing their current health status. This paper deals with one of the best-known techniques for reliability analysis: the reliability block diagram. This method models the reliability of the system based on the system's architecture and the reliability of its components. The work analyses the control system of a 2MW wind turbine, proposing two different reliability models. The first draws on a standard control system architecture. The second introduces a cold standby redundancy architecture for the data acquisition subsystem and a warm standby redundancy architecture for the power supply subsystem. With these configurations, it is possible to improve the system reliability by neglecting some failure modes because one of the branches of the redundant configuration will be either inactive or partially active.",

keywords = "Control system, RBD, Redundancy, Reliability, Standby redundancy, Wind turbine",

author = "Marcantonio Catelani and Lorenzo Ciani and Gabriele Patrizi and Diego Galar",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 5th Annual IEEE International Symposium on Systems Engineering, ISSE 2019 ; Conference date: 01-10-2019 Through 03-10-2019",

year = "2019",

month = oct,

doi = "10.1109/ISSE46696.2019.8984510",

language = "English",

series = "ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings",

address = "United States",

}

Catelani, M, Ciani, L, Patrizi, G & Galar, D 2019, Reliability improvement of wind turbine control system based on standby redundancy. En ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings., 8984510, ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings, Institute of Electrical and Electronics Engineers Inc., 5th Annual IEEE International Symposium on Systems Engineering, ISSE 2019, Edinburgh, Reino Unido, 1/10/19. https://doi.org/10.1109/ISSE46696.2019.8984510

Reliability improvement of wind turbine control system based on standby redundancy. / Catelani, Marcantonio; Ciani, Lorenzo; Patrizi, Gabriele et al.
ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. 8984510 (ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Reliability improvement of wind turbine control system based on standby redundancy

AU - Catelani, Marcantonio

AU - Ciani, Lorenzo

AU - Patrizi, Gabriele

AU - Galar, Diego

PY - 2019/10

Y1 - 2019/10

N2 - Reliability analysis is widely used in many industrial fields to predict the remaining life of complex systems by assessing their current health status. This paper deals with one of the best-known techniques for reliability analysis: the reliability block diagram. This method models the reliability of the system based on the system's architecture and the reliability of its components. The work analyses the control system of a 2MW wind turbine, proposing two different reliability models. The first draws on a standard control system architecture. The second introduces a cold standby redundancy architecture for the data acquisition subsystem and a warm standby redundancy architecture for the power supply subsystem. With these configurations, it is possible to improve the system reliability by neglecting some failure modes because one of the branches of the redundant configuration will be either inactive or partially active.

AB - Reliability analysis is widely used in many industrial fields to predict the remaining life of complex systems by assessing their current health status. This paper deals with one of the best-known techniques for reliability analysis: the reliability block diagram. This method models the reliability of the system based on the system's architecture and the reliability of its components. The work analyses the control system of a 2MW wind turbine, proposing two different reliability models. The first draws on a standard control system architecture. The second introduces a cold standby redundancy architecture for the data acquisition subsystem and a warm standby redundancy architecture for the power supply subsystem. With these configurations, it is possible to improve the system reliability by neglecting some failure modes because one of the branches of the redundant configuration will be either inactive or partially active.

KW - Control system

KW - RBD

KW - Redundancy

KW - Reliability

KW - Standby redundancy

KW - Wind turbine

UR - https://www.scopus.com/pages/publications/85081077717

U2 - 10.1109/ISSE46696.2019.8984510

DO - 10.1109/ISSE46696.2019.8984510

M3 - Conference contribution

AN - SCOPUS:85081077717

T3 - ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings

BT - ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th Annual IEEE International Symposium on Systems Engineering, ISSE 2019

Y2 - 1 October 2019 through 3 October 2019

ER -

Catelani M, Ciani L, Patrizi G, Galar D. Reliability improvement of wind turbine control system based on standby redundancy. En ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2019. 8984510. (ISSE 2019 - 5th IEEE International Symposium on Systems Engineering, Proceedings). doi: 10.1109/ISSE46696.2019.8984510

Reliability improvement of wind turbine control system based on standby redundancy

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto