Surface roughness improvement using laser-polishing techniques

A. Lamikiz; J. A. Sánchez; L. N.López De Lacalle; D. Del Pozo; J. M. Etayo

doi:10.4028/www.scientific.net/MSF.526.217

Surface roughness improvement using laser-polishing techniques

A. Lamikiz^*
, J. A. Sánchez
, L. N.López De Lacalle
, D. Del Pozo
, J. M. Etayo

^*Autor correspondiente de este trabajo

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

36 Citas (Scopus)

Resumen

A laser polishing method applied on metallic surfaces is presented in this work. One of the most important applications of this technique is the small-medium injection mould polishing manufactured by rapid manufacturing processes (RM) such as selective laser sintering. The polishing method has been applied to different surfaces including a laser-sintered part. Topography and roughness parameters measurements show that laser polishing can achieve surface improvements up to three times in mean roughness parameter with no macro-geometric deviations.

Idioma original	Inglés
Título de la publicación alojada	Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference)
Editorial	Trans Tech Publications Ltd
Páginas	217-222
Número de páginas	6
ISBN (versión impresa)	9780878494170
DOI	https://doi.org/10.4028/www.scientific.net/MSF.526.217
Estado	Publicada - 2006
Evento	1st Manufacturing Engineering Society international Conference, (MESIC) - Calatayud, Espana Duración: 1 sept 2005 → 1 sept 2005

Serie de la publicación

Nombre	Materials Science Forum
Volumen	526
ISSN (versión impresa)	0255-5476
ISSN (versión digital)	1662-9752

Conferencia

Conferencia	1st Manufacturing Engineering Society international Conference, (MESIC)
País/Territorio	Espana
Ciudad	Calatayud
Período	1/09/05 → 1/09/05

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 9: Industria, innovación e infraestructura

Acceder al documento

10.4028/www.scientific.net/MSF.526.217

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Lamikiz, A., Sánchez, J. A., De Lacalle, L. N. L., Del Pozo, D., & Etayo, J. M. (2006). Surface roughness improvement using laser-polishing techniques. En Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference) (pp. 217-222). (Materials Science Forum; Vol. 526). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.526.217

Lamikiz, A. ; Sánchez, J. A. ; De Lacalle, L. N.López et al. / Surface roughness improvement using laser-polishing techniques. Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference). Trans Tech Publications Ltd, 2006. pp. 217-222 (Materials Science Forum).

@inproceedings{6bea9c72045d42fd9c52ca8f9af8146c,

title = "Surface roughness improvement using laser-polishing techniques",

abstract = "A laser polishing method applied on metallic surfaces is presented in this work. One of the most important applications of this technique is the small-medium injection mould polishing manufactured by rapid manufacturing processes (RM) such as selective laser sintering. The polishing method has been applied to different surfaces including a laser-sintered part. Topography and roughness parameters measurements show that laser polishing can achieve surface improvements up to three times in mean roughness parameter with no macro-geometric deviations.",

keywords = "CO laser, Mould, Polishing",

author = "A. Lamikiz and S{\'a}nchez, \{J. A.\} and \{De Lacalle\}, \{L. N.L{\'o}pez\} and \{Del Pozo\}, D. and Etayo, \{J. M.\}",

year = "2006",

doi = "10.4028/www.scientific.net/MSF.526.217",

language = "English",

isbn = "9780878494170",

series = "Materials Science Forum",

publisher = "Trans Tech Publications Ltd",

pages = "217--222",

booktitle = "Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference)",

note = "1st Manufacturing Engineering Society international Conference, (MESIC) ; Conference date: 01-09-2005 Through 01-09-2005",

}

Lamikiz, A, Sánchez, JA, De Lacalle, LNL, Del Pozo, D & Etayo, JM 2006, Surface roughness improvement using laser-polishing techniques. En Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference). Materials Science Forum, vol. 526, Trans Tech Publications Ltd, pp. 217-222, 1st Manufacturing Engineering Society international Conference, (MESIC), Calatayud, Espana, 1/09/05. https://doi.org/10.4028/www.scientific.net/MSF.526.217

Surface roughness improvement using laser-polishing techniques. / Lamikiz, A.; Sánchez, J. A.; De Lacalle, L. N.López et al.
Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference). Trans Tech Publications Ltd, 2006. p. 217-222 (Materials Science Forum; Vol. 526).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Surface roughness improvement using laser-polishing techniques

AU - Lamikiz, A.

AU - Sánchez, J. A.

AU - De Lacalle, L. N.López

AU - Del Pozo, D.

AU - Etayo, J. M.

PY - 2006

Y1 - 2006

N2 - A laser polishing method applied on metallic surfaces is presented in this work. One of the most important applications of this technique is the small-medium injection mould polishing manufactured by rapid manufacturing processes (RM) such as selective laser sintering. The polishing method has been applied to different surfaces including a laser-sintered part. Topography and roughness parameters measurements show that laser polishing can achieve surface improvements up to three times in mean roughness parameter with no macro-geometric deviations.

AB - A laser polishing method applied on metallic surfaces is presented in this work. One of the most important applications of this technique is the small-medium injection mould polishing manufactured by rapid manufacturing processes (RM) such as selective laser sintering. The polishing method has been applied to different surfaces including a laser-sintered part. Topography and roughness parameters measurements show that laser polishing can achieve surface improvements up to three times in mean roughness parameter with no macro-geometric deviations.

KW - CO laser

KW - Mould

KW - Polishing

UR - https://www.scopus.com/pages/publications/37349024787

U2 - 10.4028/www.scientific.net/MSF.526.217

DO - 10.4028/www.scientific.net/MSF.526.217

M3 - Conference contribution

AN - SCOPUS:37349024787

SN - 9780878494170

T3 - Materials Science Forum

SP - 217

EP - 222

BT - Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference)

PB - Trans Tech Publications Ltd

T2 - 1st Manufacturing Engineering Society international Conference, (MESIC)

Y2 - 1 September 2005 through 1 September 2005

ER -

Lamikiz A, Sánchez JA, De Lacalle LNL, Del Pozo D, Etayo JM. Surface roughness improvement using laser-polishing techniques. En Advances in Materials Processing Technologies - Selected Papers from Materials Processing Symposium (First Manufacturing Engineering Society International Conference). Trans Tech Publications Ltd. 2006. p. 217-222. (Materials Science Forum). doi: 10.4028/www.scientific.net/MSF.526.217

Surface roughness improvement using laser-polishing techniques

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto