Test bench for helicopter electro mechanical actuation system validation: Design and validation of dedicated test bench for aeronautical electromechanical actuators

Imanol Echevarria*, Joseba Lasa, Pablo Casado, Alberto Dominguez, Inigo Eguizabal, Mikel Lizeaga, Raul Perez, Oscar Berenguer

*Autor correspondiente de este trabajo

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

9 Citas (Scopus)

Resumen

The introduction of a new product in the aeronautical sector implies conducting characterization tests in an automated, safe and sustainable way. This paper describes a dedicated test bench design and validation that allows characterizing a swashplate Helicopter Electro Mechanical Actuation System (HEMAS). The test bench replicates the operating conditions that the actuator will encounter in service simulating the aerodynamic force by a hydraulic counter load system. The results obtained in validation tests show the ability of the test bench to replicate specified test cases. The validation was performed using a hydraulic cylinder to replicate the motion profile that will be followed by the actuator. The test campaign with the actuator will be performed during 2015.

Idioma originalInglés
Título de la publicación alojada2015 IEEE International Conference on Industrial Technology, ICIT 2015
EditorialInstitute of Electrical and Electronics Engineers Inc.
Páginas517-523
Número de páginas7
EdiciónJune
ISBN (versión digital)9781479978007
DOI
EstadoPublicada - 16 jun 2015
Evento2015 IEEE International Conference on Industrial Technology, ICIT 2015 - Seville, Espana
Duración: 17 mar 201519 mar 2015

Serie de la publicación

NombreProceedings of the IEEE International Conference on Industrial Technology
NúmeroJune
Volumen2015-June

Conferencia

Conferencia2015 IEEE International Conference on Industrial Technology, ICIT 2015
País/TerritorioEspana
CiudadSeville
Período17/03/1519/03/15

Huella

Profundice en los temas de investigación de 'Test bench for helicopter electro mechanical actuation system validation: Design and validation of dedicated test bench for aeronautical electromechanical actuators'. En conjunto forman una huella única.

Citar esto