TY - JOUR
T1 - The effect of the addition of carbon nanotubes in the hydrothermal synthesis and in the thermal phase stability of nanozirconia
AU - Garmendia, N.
AU - Arteche, A.
AU - García, A.
AU - Bustero, I.
AU - Obieta, I.
PY - 2010/4
Y1 - 2010/4
N2 - The yttria partially stabilized zirconia is a very attractive material for orthopaedic applications. It exhibits excellent biocompatibility, high fracture toughness, high strength and low wear rates. But case studies show that delayed failure can occur in vivo due to crack propagation. Carbon nanotubes could avoid the slow crack propagation and enhance the toughness of the ceramic material used for prostheses fabrication. In this work, X-ray diffraction has been used to study the influence of the addition of MWCNT on the hydrothermal synthesis of tetragonal zirconia nanoparticles and on the phase stability of the CNT-nanozirconia nanocomposite with the temperature. First, the influence of the processing variables on the hydrothermal synthesis has been studied. The theoretical mathematical models that relate the percentage of tetragonal zirconia nanocrystals and the relative crystallinity with the processing variables in the range of analyzed values have been obtained. The values that give the maximum percentage and crystallinity of tetragonal phase in the studied range have been established. No significant differences were observed in the crystalline phases obtained when adding MWCNT during the synthesis. Nanozirconia partially coated MWCNT synthesized under the optimized parameters were added to commercially available nanozirconia particles and their influence in the phase stability of the zirconia with the temperature was studied by XRD. It was concluded that the addition of the carbon nanotubes delays both the monoclinic phase decomposition and the grain growth.
AB - The yttria partially stabilized zirconia is a very attractive material for orthopaedic applications. It exhibits excellent biocompatibility, high fracture toughness, high strength and low wear rates. But case studies show that delayed failure can occur in vivo due to crack propagation. Carbon nanotubes could avoid the slow crack propagation and enhance the toughness of the ceramic material used for prostheses fabrication. In this work, X-ray diffraction has been used to study the influence of the addition of MWCNT on the hydrothermal synthesis of tetragonal zirconia nanoparticles and on the phase stability of the CNT-nanozirconia nanocomposite with the temperature. First, the influence of the processing variables on the hydrothermal synthesis has been studied. The theoretical mathematical models that relate the percentage of tetragonal zirconia nanocrystals and the relative crystallinity with the processing variables in the range of analyzed values have been obtained. The values that give the maximum percentage and crystallinity of tetragonal phase in the studied range have been established. No significant differences were observed in the crystalline phases obtained when adding MWCNT during the synthesis. Nanozirconia partially coated MWCNT synthesized under the optimized parameters were added to commercially available nanozirconia particles and their influence in the phase stability of the zirconia with the temperature was studied by XRD. It was concluded that the addition of the carbon nanotubes delays both the monoclinic phase decomposition and the grain growth.
KW - Carbon nanotubes
KW - Design of experiments
KW - Hydrothermal synthesis
KW - Nanozirconia
KW - XRD
UR - http://www.scopus.com/inward/record.url?scp=77954983513&partnerID=8YFLogxK
U2 - 10.1166/jnn.2010.1444
DO - 10.1166/jnn.2010.1444
M3 - Article
AN - SCOPUS:77954983513
SN - 1533-4880
VL - 10
SP - 2759
EP - 2763
JO - Journal of Nanoscience and Nanotechnology
JF - Journal of Nanoscience and Nanotechnology
IS - 4
ER -