The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

E. San Telmo; I. Canales; J. L. Villate; E. Robles; S. Apinaniz

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

E. San Telmo^*
, I. Canales
, J. L. Villate
, E. Robles
, S. Apinaniz

^*Autor correspondiente de este trabajo

Fundación TECNALIA Research & Innovation

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

2 Citas (Scopus)

Resumen

The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

Idioma original	Inglés
Título de la publicación alojada	European Wind Energy Conference and Exhibition 2007, EWEC 2007
Páginas	1517-1521
Número de páginas	5
Estado	Publicada - 2007
Evento	European Wind Energy Conference and Exhibition 2007, EWEC 2007 - Milan, Italia Duración: 7 may 2007 → 10 may 2007

Serie de la publicación

Nombre	European Wind Energy Conference and Exhibition 2007, EWEC 2007
Volumen	3

Conferencia

Conferencia	European Wind Energy Conference and Exhibition 2007, EWEC 2007
País/Territorio	Italia
Ciudad	Milan
Período	7/05/07 → 10/05/07

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@inproceedings{785a7022ab8547fc816f7e4c0d6965b3,

title = "The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability",

abstract = "The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.",

keywords = "Communication, Iec 61400-25, Integration, Interoperability, Wind power plants",

author = "\{San Telmo\}, E. and I. Canales and Villate, \{J. L.\} and E. Robles and S. Apinaniz",

year = "2007",

language = "English",

isbn = "9781622764686",

series = "European Wind Energy Conference and Exhibition 2007, EWEC 2007",

pages = "1517--1521",

booktitle = "European Wind Energy Conference and Exhibition 2007, EWEC 2007",

note = "European Wind Energy Conference and Exhibition 2007, EWEC 2007 ; Conference date: 07-05-2007 Through 10-05-2007",

}

San Telmo, E, Canales, I, Villate, JL , Robles, E & Apinaniz, S 2007, The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability. En European Wind Energy Conference and Exhibition 2007, EWEC 2007. European Wind Energy Conference and Exhibition 2007, EWEC 2007, vol. 3, pp. 1517-1521, European Wind Energy Conference and Exhibition 2007, EWEC 2007, Milan, Italia, 7/05/07.

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability. / San Telmo, E.; Canales, I.; Villate, J. L. et al.
European Wind Energy Conference and Exhibition 2007, EWEC 2007. 2007. p. 1517-1521 (European Wind Energy Conference and Exhibition 2007, EWEC 2007; Vol. 3).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

AU - San Telmo, E.

AU - Canales, I.

AU - Villate, J. L.

AU - Robles, E.

AU - Apinaniz, S.

PY - 2007

Y1 - 2007

N2 - The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

AB - The main purpose of the standard IEC 61400-25 is the unification of communication systems in wind power plants, both for internal exchange of information and for remote control. Most of the current control and monitoring systems used in wind farms are vendor-specific and the protocols and data provided by these systems are therefore dependent on their manufacturer. This paper explains the main features of IEC 61400-25 standard, and it also highlights its advantages for the integration of wind farms into the electric system.

KW - Communication

KW - Iec 61400-25

KW - Integration

KW - Interoperability

KW - Wind power plants

UR - https://www.scopus.com/pages/publications/84875349623

M3 - Conference contribution

AN - SCOPUS:84875349623

SN - 9781622764686

T3 - European Wind Energy Conference and Exhibition 2007, EWEC 2007

SP - 1517

EP - 1521

BT - European Wind Energy Conference and Exhibition 2007, EWEC 2007

T2 - European Wind Energy Conference and Exhibition 2007, EWEC 2007

Y2 - 7 May 2007 through 10 May 2007

ER -

The use of iec 61400-25 standard to integrate wind power plants into the control of power system stability

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Otros archivos y enlaces

Huella

Citar esto