Thread Quality Control in High-Speed Tapping Cycles

Alain Gil Del Val; Fernando Veiga; Alfredo Suárez; Mikel Arizmendi

doi:10.3390/jmmp4010009

Thread Quality Control in High-Speed Tapping Cycles

Alain Gil Del Val
, Fernando Veiga
, Alfredo Suárez
, Mikel Arizmendi

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

11 Citas (Scopus)

1 Descargas (Pure)

Resumen

Thread quality control is becoming a widespread necessity in manufacturing to guarantee the geometry of the resulting screws on the workpiece due to the high industrial costs. Besides, the industrial inspection is manual provoking high rates of manufacturing delays. Therefore, the aim of this paper consists of developing a statistical quality control approach acquiring the data (torque signal) coming from the spindle drive for assessing thread quality using different coatings. The system shows a red light when the tap wear is critical before machining in unacceptable screw threads. Therefore, the application could reduce these high industrial costs because it can work self-governance.

Idioma original	Inglés
Número de artículo	4010009
Páginas (desde-hasta)	9
Número de páginas	1
Publicación	Journal of Manufacturing and Materials Processing
Volumen	4
N.º	1
DOI	https://doi.org/10.3390/jmmp4010009
Estado	Publicada - feb 2020

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 9: Industria, innovación e infraestructura

Palabras clave

Thread
Quality
Control
Tapping

Project and Funding Information

Funding Info
This research was funded by the vice‐counseling of technology, innovation and competitiveness of the_x000D_ Basque Government grant agreements IT‐2005/00201, ZL‐2019/00720 (HARDCRAFT project) and KK‐2019/00004_x000D_ (PROCODA project).

Acceder al documento

10.3390/jmmp4010009

JmmpVersión publicada final, 3,82 MB

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@article{abcd0bc31e2c4ec9bd762c42ab6a5e24,

title = "Thread Quality Control in High-Speed Tapping Cycles",

abstract = "Thread quality control is becoming a widespread necessity in manufacturing to guarantee the geometry of the resulting screws on the workpiece due to the high industrial costs. Besides, the industrial inspection is manual provoking high rates of manufacturing delays. Therefore, the aim of this paper consists of developing a statistical quality control approach acquiring the data (torque signal) coming from the spindle drive for assessing thread quality using different coatings. The system shows a red light when the tap wear is critical before machining in unacceptable screw threads. Therefore, the application could reduce these high industrial costs because it can work self-governance.",

keywords = "Thread, Quality, Control, Tapping, Thread, Quality, Control, Tapping",

author = "\{Gil Del Val\}, Alain and Fernando Veiga and Alfredo Su{\'a}rez and Mikel Arizmendi",

note = "Publisher Copyright: {\textcopyright} 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).",

year = "2020",

month = feb,

doi = "10.3390/jmmp4010009",

language = "English",

volume = "4",

pages = "9",

journal = "Journal of Manufacturing and Materials Processing",

issn = "2504-4494",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "1",

}

TY - JOUR

T1 - Thread Quality Control in High-Speed Tapping Cycles

AU - Gil Del Val, Alain

AU - Veiga, Fernando

AU - Suárez, Alfredo

AU - Arizmendi, Mikel

N1 - Publisher Copyright: © 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

PY - 2020/2

Y1 - 2020/2

N2 - Thread quality control is becoming a widespread necessity in manufacturing to guarantee the geometry of the resulting screws on the workpiece due to the high industrial costs. Besides, the industrial inspection is manual provoking high rates of manufacturing delays. Therefore, the aim of this paper consists of developing a statistical quality control approach acquiring the data (torque signal) coming from the spindle drive for assessing thread quality using different coatings. The system shows a red light when the tap wear is critical before machining in unacceptable screw threads. Therefore, the application could reduce these high industrial costs because it can work self-governance.

AB - Thread quality control is becoming a widespread necessity in manufacturing to guarantee the geometry of the resulting screws on the workpiece due to the high industrial costs. Besides, the industrial inspection is manual provoking high rates of manufacturing delays. Therefore, the aim of this paper consists of developing a statistical quality control approach acquiring the data (torque signal) coming from the spindle drive for assessing thread quality using different coatings. The system shows a red light when the tap wear is critical before machining in unacceptable screw threads. Therefore, the application could reduce these high industrial costs because it can work self-governance.

KW - Thread

KW - Quality

KW - Control

KW - Tapping

KW - Thread

KW - Quality

KW - Control

KW - Tapping

UR - https://www.scopus.com/pages/publications/85083516322

U2 - 10.3390/jmmp4010009

DO - 10.3390/jmmp4010009

M3 - Article

SN - 2504-4494

VL - 4

SP - 9

JO - Journal of Manufacturing and Materials Processing

JF - Journal of Manufacturing and Materials Processing

IS - 1

M1 - 4010009

ER -

Thread Quality Control in High-Speed Tapping Cycles

Resumen

ODS de las Naciones Unidas

Palabras clave

Project and Funding Information

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto