Skip to search boxSkip to navigationSkip to main content

Influence of membrane skin morphology on CO2/N2 separation at sub-ambient temperatures

  • Lu Liu
    ,
  • Edgar S. Sanders
    ,
  • Justin R. Johnson
    ,
  • Oguz Karvan
    ,
  • Sudhir Kulkarni
    ,
  • David J. Hasse
*Corresponding author for this work
  • Georgia Institute of Technology
Research Output:
Contribution to journal
Article
Research
Peer-review

Abstract

Matrimid® hollow fiber membranes with silicone rubber (PDMS) calked fused nodular selective layers display much higher CO2/N2 selectivity as well as higher CO2 permeance than those with isotropic dense selective layers at 253.15 K. Two kinds of asymmetric hollow fiber membranes were successfully spun: fibers with fused nodular skins and fibers with truly dense skins. The skin morphologies were confirmed with SEM images. CO2/N2 mixed gas permeation characterization was carried out within the temperature range of 253.15 K to 308.15 K. Permeation results showed that, at 253.15 K, the nodular-skinned fibers displayed CO2/N2 selectivity of 90.5, and CO2 permeance of 63.3GPU after standard PDMS calking; while the dense-skinned fibers displayed CO2/N2 selectivity of 52.5, and CO2 permeance of 16.6GPU. The PDMS calking had negligible effect on the dense-skinned fibers, but it was necessary for the fused nodular-skinned fibers. A hypothesis regarding the introduction of Langmuir sorption sites and a local orientation of polymer chain segments is proposed to explain the better performance of the calked nodular-skinned fibers. This work provides a promising method for improved hollow fiber membranes for the removal of CO2 from flue gas.

Research Output Information

Output type

Research Output:
Contribution to journal
Article
Research
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 433-439 (7 pages)

Journal (Volume, Issue Number)

Journal of Membrane Science (Volume 446)

Publication milestones

  • Published - 01/11/2013

Publication status

Published - 01/11/2013

ISSN

0376-7388

Publication IDs

  • Scopus: 84883146260

Sustainable Development Goals

  • SDG 13 - Climate Action
    SDG 13 Climate Action

Publication metrics

Metrics

SciVal
citations
39
SciVal
FWCI
0.53
SciVal
Author count
7
SciVal
Paper percentile
58
Scopus
citations

PlumX, opens in new tab

Citation count
39
Captures
49