Skip to search boxSkip to navigationSkip to main content

Investigation of as-cast light alloys by selected homogenization techniques with microstructure effects

  • Ludmila Parashkevova(corresponding author)
    ,
  • Pedro Egizabal
*Corresponding author for this work
Research Output:
Chapter in Book/Report/Conference proceeding
Chapter
Research
Peer-review

Abstract

<p>In the present contribution, upgrading the findings of previous works, [1, 2], new models are proposed for evaluation of effective mechanical properties of light alloys regarded as multiphase composites. These models are aimed to improve the mechanical properties predictions of two groups light alloys: die cast Mg alloys AZ and metal foams with closed cells. The presented models are variants of Mean Field Homogenization (MFH) approach and Differential Homogenization Method, (DHM), both accounting for microstructure size effects. They are appropriate for composite structures where the content of non- matrix phases is predominant. The microstructure - properties relationships for AZ Mg alloy with Continuous (C) and Discontinuous (D) intermetallic phase precipitations are investigated applying MFH and DHM approaches. The basic distinction between cases (C) and (D) consists of different arrangement and volume fraction of harder intermetallic phase Mg17Al12. The type of the microstructure observed depends mainly on the applied cooling regime and chemical composition of the alloy. The elastic-plastic properties predictions for both types of microstructure topology are compared and discussed. The elastic behavior of foams with closed pores is simulated applying DHM, where the size sensitive variant of Mori-Tanaka scheme is used as a basic ‘dilute case’ procedure. The method is developed to closed form solutions of corresponding system of differential equations. The results obtained by means of the size-sensitive DHM are compared with experimental data for aluminium and glass foams taken from the literature.</p>

Research Output Information

Output type

Research Output:
Chapter in Book/Report/Conference proceeding
Chapter
Research
Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 355-368 (14 pages)

Publication milestones

  • Published - 2019

Publication status

Published - 2019

Publisher

Springer Verlag, Germany

Publication series

  • Publication series name: Studies in Computational Intelligence
    ISSN (Print): 1860-949X
    Volume: 793

Publication IDs

  • Scopus: 85054189795

Host publication title

Studies in Computational Intelligence

Funding Details

Acknowledgements This research is carrying out in the frame of KMM-VIN - European Virtual Institute. The financial support of BG FSI through the grant DH 07/17/2016 ‘New approach for structure and properties design of amorphous and nanostructured metallic foams’ is gratefully acknowledged.
FunderFunding number
FSI
DH 07/17/2016

Publication metrics

Metrics

SciVal
FWCI
0.27
SciVal
Author count
2
SciVal
Paper percentile
40
SciVal
citations
1
Scopus
citations

PlumX, opens in new tab

Citation count
1
Captures
2