Saltar a casilla de búsquedaSaltar a navegaciónIr directamente al contenido principal

Evolution of mineralogical phases produced during the pozzolanic reaction of different metakaolinite by-products: Influence of the activation process

  • M. Frías(autor correspondiente)
    ,
  • R. Vigil
    ,
  • R. García
    ,
  • O. Rodríguez
    ,
  • S. Goñi
    ,
*Autor correspondiente de este trabajo
  • CSIC - Instituto de Ciencias de la Construcción Eduardo Torroja (IETCC)
    ,
  • Universidad Autónoma de Madrid
    ,
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Abstract

<p>In the past, different investigations have focused on waste containing kaolinite as an alternative source for recycled metakaolinite. However, it is well known that the activation conditions play an important role in the characteristics of the final product. This research presents an exhaustive study about the evolution of the mineralogical phases during the pozzolanic reaction of two metakaolinite by-products obtained from different activation processes: activation of paper sludge at lab scale (700 °C and 2. h) and at industrial scale (720-740 °C and 20-30. min) with a fluidized bed combustion system.It is shown that both metakaolinite by-products exhibit a different pozzolanic behavior, suggesting a direct influence on the subsequent performance of new blended cement matrices. The metakaolinite by-product obtained at lab-scale (MWL), generates an additional phase (carbonate/metakaolinite type structures) as predominant crystalline phase in the pozzolan/Ca(OH) <sub>2</sub> system up to 28days of reaction. Stratlingite (C <sub>2</sub>ASH <sub>8</sub>) also appeared as minor stable phase after 7days of reaction. On the other hand, the metakaolinite by-product from industrial process (MWI) favors the formation of C <sub>4</sub>AC̄H <sub>12</sub> phase, whereas stratlingite was not identified.</p>

Research Output Information

Tipo de resultado

Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Idioma original

Inglés

Páginas desde-hasta (Número de páginas)

Páginas 48-52 (5 páginas)

Revista (Volumen, Número de Edición)

Applied Clay Science (Volumen 56)

Hitos de publicación

  • Publicada - 02/2012

Estado de publicación

Publicada - 02/2012

ISSN

0169-1317

ID de publicación

  • Scopus: 84855959296

Funding Details

This research has been supported by the Spanish Ministry of Science and Technology (Project Ref. MAT2009-10874-CO3-01/02/03 ). The authors are also grateful to the Holmer Paper Madrid and to Spanish Cement Institute (IECA) for their help in this research. In addition, we want to thank CDEM for Topcrete.
FunderFunding number
MICYT
MAT2009-10874-CO3-01/02/03

Publication metrics

Métricas

SciVal
FWCI
2.02
SciVal
Número de autores
6
SciVal
Percentil de artículo
86
SciVal
citaciones
32

PlumX, se abre en una pestaña nueva

Capturas
61
Número de citas
32