Saltar a casilla de búsquedaSaltar a navegaciónIr directamente al contenido principal

Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress

  • Pello Larrinaga(autor correspondiente)
    ,
  • Carlos Chastre
    ,
  • Hugo C. Biscaia
    ,
  • José T. San-José
*Autor correspondiente de este trabajo
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Abstract

During the last years several projects and studies have improved the knowledge about textile reinforced mortar (TRM) technology. TRM has already been used in strengthening masonry and reinforced concrete structural elements such as walls, arches, columns and beams. This material is presented as a real alternative to the use of fiber-reinforced polymers (FRP) in situations where these composites have presented some drawbacks or their use is banned. Textile reinforced mortar show a complex mechanical behavior derived from the heterogeneity of the constituent materials. This paper aims to deepen the knowledge of this composite material in terms of tensile behavior.Following this scope, this paper presents an experimental campaign focused on thirty-one TRM specimens reinforced with four different reinforcing ratios. The results are analyzed and contrasted with two distinct models. (i) The Aveston-Cooper-Kelly theory (ACK) which is based on a tri-linear analytical approach; and (ii) a non-linear numerical simulation with a 3D finite element code.The finite element analysis (FEA) of the TRM tensile tests also showed no significant dependence on the basalt-to-mortar interface, i.e., the choice of a bond-slip curve in order to reproduce the bond stresses and slippages along the interface is irrelevant and it can be simply considered as rigid interface.

Research Output Information

Tipo de resultado

Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Idioma original

Inglés

Páginas desde-hasta (Número de páginas)

Páginas 66-74 (9 páginas)

Revista (Volumen, Número de Edición)

Materials and Design (Volumen 55)

Hitos de publicación

  • Publicada - 03/2014

Estado de publicación

Publicada - 03/2014

ISSN

0261-3069

ID de publicación

  • Scopus: 84886613165

Funding Details

This research work was funded through the research projects DFB 7-12-TK-2009-10 and BIA2010-20789-C04-03/04; the Basque Government’s contract IT781-13; and the scholarship programme of the Iñaki Goenaga Foundation.
FundersFunding number
FCT-IG
-
Eusko Jaurlaritza
IT781-13

Publication metrics

Métricas

SciVal
citaciones
207
SciVal
FWCI
3.28
SciVal
Número de autores
4
SciVal
Percentil de artículo
93
SciVal
Percentil superior
10

PlumX, se abre en una pestaña nueva

Capturas
222
Menciones
1
Número de citas
208