Saltar a casilla de búsquedaSaltar a navegaciónIr directamente al contenido principal

Identification and vibration attenuation for the parallel robot par2

  • Luiz R. Douat
    ,
  • Isabelle Queinnec
    ,
  • Germain Garcia
    ,
  • Micaël Michelin
    ,
  • François Pierrot
    ,
  • Sophie Tarbouriech
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Abstract

Par2 is a parallel robot with two degrees of freedom designed for high-speed and high-accuracy industrial pick-and-place operation tasks. As a result of the high acceleration trajectories, the end-effector undergoes some undesirable vibrations after reaching the stop positions, compromising its precision and leading to an increase in the operation cycle time. Accelerometer sensors placed on the end-effector and piezoelectric patch actuators wrapped around the robot arms are employed in order to actively reduce these vibrations in a noncollocated closed-loop setting. After submitting the robot to an identification procedure, the obtained nominal model is used to synthesize a reduced order controller with the H∞ loop-shaping technique. Performance analysis as well as simulation and experimental results show that vibration reduction is achieved around the nominal operating point, but fails for some extreme operating points, due to high control efforts. An anti-windup strategy is then employed to deal with the saturation of the actuator, which allows achieving vibration attenuation on the whole operation domain, for a given configuration of the robot at the stop point.

Research Output Information

Tipo de resultado

Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Idioma original

Inglés

Número de artículo

6490024

Páginas desde-hasta (Número de páginas)

Páginas 190-200 (11 páginas)

Revista (Volumen, Número de Edición)

IEEE Transactions on Control Systems Technology (Volumen 22, Número 1)

Hitos de publicación

  • Publicada - 01/2014

Estado de publicación

Publicada - 01/2014

ISSN

1063-6536

ID de publicación

  • Scopus: 84891557973

Publication metrics

Métricas

SciVal
FWCI
1.12
SciVal
Número de autores
6
SciVal
Percentil de artículo
74
SciVal
citaciones
18

PlumX, se abre en una pestaña nueva

Capturas
18
Número de citas
18