Saltar a casilla de búsquedaSaltar a navegaciónIr directamente al contenido principal

Low-grade RC beams strengthened with TRM composite based on basalt, carbon and steel textiles: Experimental and analytical study

  • Pello Larrinaga
    ,
  • Leire Garmendia
    ,
  • Carlos Chastre
    ,
  • José Tomás San-José(autor correspondiente)
*Autor correspondiente de este trabajo
  • NOVA University Lisbon
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Acceso abierto

Abstract

<p>This study develops an easy-to-conduct numerical calculation method to assess the effect of Textile Reinforced Mortar when used as externally bonded flexural strengthening technique in low-grade reinforced concrete beams from ancient structures (aged between 60 and 100 years old). Using materials main mechanical characteristics and the beams dimensions as inputs, the model defines the behaviour of the strengthened elements. This paper includes the experimental characterization of the whole strengthening solution, from the constituent materials and the composite in pure tensile to scaled beams strengthened in flexure. In total three different materials – basalt, carbon and steel cords – are used as Textile Reinforced Mortar inner reinforcement. Tests are carried out on sixteen low-grade reinforced concrete beams that reproduce low-quality concretes with a compression strength below 17 MPa and, in general, poor mechanical properties, as those present in old and decayed structures. This experimental campaign includes the study of two other particular features of the adopted retrofitting technique: the strengthening ratio and the use of an anchorage system. The obtained experimental findings are assessed and satisfactorily compared with the developed numerical approach, leading us to conclude that Textile Reinforced Mortar is an effective solution for retrofitting structures made of low-grade reinforced concretes in terms of increasing their deformation and load-bearing capacity under flexural loads (the maximum bending moment has increased between 30% and 200%). Besides, the failure mechanism due to undesired premature detachment was effectively countered using U-shaped anchors, failing the strengthened beams due to the composite tensile failure.</p>

Research Output Information

Tipo de resultado

Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Idioma original

Inglés

Número de artículo

e00906

Revista (Volumen, Número de Edición)

Case Studies in Construction Materials (Volumen 16)

Hitos de publicación

  • Publicada - 06/2022

Estado de publicación

Publicada - 06/2022

ISSN

2214-5095

ID de publicación

  • Scopus: 85123356072

Funding Details

The authors wish to express their gratitude to the support received from Morteros y Revocos Bikain, S.A. (IDI-20101594) and Orion Reparación Estructural S.L. (IDI-20101592) within the framework of TERREME project. Our thanks also go to MCIN/AEI/10.13039/501100011033/ FEDER, UE [PID2021–124203OB-I00 and RTI2018–097079-B-C31] and, finally, to SAREN research group (IT1619–22, the Basque Government).
FundersFunding numbers
FEDER
-
Eusko Jaurlaritza
-
UE
PID2021–124203OB-I00, IT1619–22, RTI2018–097079-B-C31

Publication metrics

Métricas

SciVal
FWCI
1.22
SciVal
Número de autores
4
SciVal
Percentil de artículo
76
SciVal
citaciones
15

PlumX, se abre en una pestaña nueva

Capturas
36
Número de citas
15