Saltar a casilla de búsquedaSaltar a navegaciónIr directamente al contenido principal

Microstructural study of vapour grown carbon nanofibre/copper composites

  • Jorge Barcena(autor correspondiente)
    ,
  • ,
  • Javier Coleto
    ,
  • Juan L. Baldonedo
    ,
  • Jose M. Gomez de Salazar
*Autor correspondiente de este trabajo
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Abstract

Vapour grown carbon nanofibres from different manufacturers have been incorporated into copper in order to obtain metal-matrix composites with high volume fraction of reinforcement. The manufacturing route involved copper deposition by the electroless plating technique and further hot-pressing of the composite powders. A material with porosity less than 1% was obtained. The microstructure was investigated by scanning electron microscopy and transmission electron microscopy. After hot-pressing the carbon nanofibres were seen to be homogeneously dispersed in the matrix and showed a random planar distribution. Despite the poor wetting between copper and carbon, the Cu/C interface formed was continuous. The matrix was composed of grains in the nanometric range, suggesting that the nanofibres act as grain growth inhibitors.

Research Output Information

Tipo de resultado

Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertos

Idioma original

Inglés

Páginas desde-hasta (Número de páginas)

Páginas 1384-1391 (8 páginas)

Revista (Volumen, Número de Edición)

Composites Science and Technology (Volumen 68, Número 6)

Hitos de publicación

  • Publicada - 05/2008

Estado de publicación

Publicada - 05/2008

ISSN

0266-3538

ID de publicación

  • Scopus: 40649123000

Funding Details

The research group would like to thank the European Commission for the grants for CRAFT project “New Highly Heat-Conducting Materials and Manufacturing Processes for Improved Efficiency of Heat Management and Packaging Components in Electronics – Heatconductives”, contract ref. COOP-CT-2005-017687, and for the IP project “New Materials for Extreme Environments - ExtreMat”, contract ref. NMP3-CT-2004-500253, whose results make up the core of this paper. J. Barcena also thanks the education, universities and research department of the Basque Country government.
FunderFunding numbers
EC
-

Sustainable Development Goals

  • ODS 9: Industria, innovación e infraestructura
    ODS 9: Industria, innovación e infraestructura

Publication metrics

Métricas

SciVal
citaciones
35
SciVal
FWCI
3.57
SciVal
Número de autores
5
SciVal
Percentil de artículo
94
SciVal
Percentil superior
10

PlumX, se abre en una pestaña nueva

Capturas
25
Número de citas
35