SAPO-18 and SAPO-34 catalysts for propylene production from the oligomerization-cracking of ethylene or 1-butene
- Eva Epelde,
- María Ibáñez,
- José Valecillos,
- Andrés T. Aguayo,
- Ana G. Gayubo,
- Javier Bilbao
Abstract
The performance of SAPO-18 and SAPO-34 catalysts has been compared during the conversion of ethylene or 1-butene to propylene. This comparison has been made in terms of activity (conversion), selectivity and stability against coke deposition. The SAPOs were synthesized, agglomerated, calcined, characterized and tested in a fixed-bed reactor at 500 °C. The spent catalysts (after 5 h on stream) were characterized to assign the location and nature of coke. The results point to the higher activity and stability of SAPO-18 catalyst in the conversions of each reactant (ethylene or 1-butene), which has been explained on the basis of its acidity, pore topology and above all, the faster diffusion of aromatics causing deactivation. Thus, the SAPO-18 catalyst suffers slower coke deposition, while this coke is of lighter nature (more aliphatic and less aromatic). The advantages of SAPO-18 over SAPO-34 catalyst are more relevant for the transformation of 1-butene, where the propylene selectivity and yield increase over time, as secondary reactions are selectively neglected and coke condensation is slowed down.
Research Output Information
Tipo de resultado
Idioma original
InglésPáginas desde-hasta (Número de páginas)
Páginas 176-182 (7 páginas)Revista (Volumen, Número de Edición)
Applied Catalysis A: General (Volumen 547)Hitos de publicación
- Publicada - 2017
Estado de publicación
ISSN
0926-860XID de publicación
- Scopus: 85028917520
