Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding
- N. Murillo(autor correspondiente),
- J. González,
- ,
- M. Gutiérrez,
- F. J. Seco
- ,
- Fundación TECNALIA Research & Innovation,
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertosAbstract
<p>Studies of micro structure (SEM and metalographic micrographs) and magnetic properties (remanent magnetisation and coercive field) have been performed on bipolar sintered Sr-ferrite permanent magnets obtained by powder injection molding (PIM) method under applied magnetic field in order to align the magnetic particles during the PIM process. Magnetic measurements on the samples were made in the parallel and perpendicular direction of the aligning magnetic field. The remanence in the direction of alignment increased sharply with the alignment field to a maximum value of 3840 Gs while the coercivity decreases to a minimum value of 3220 Oe.</p>
Research Output Information
Tipo de resultado
Publicación:
Contribución a una revista
Artículo
Investigación
Revisión por expertosIdioma original
InglésPáginas desde-hasta (Número de páginas)
Páginas 165-168 (4 páginas)Revista (Volumen, Número de Edición)
Journal of Magnetism and Magnetic Materials (Volumen 203, Número 1-3)Hitos de publicación
- Publicada - 08/1999
Estado de publicación
Publicada - 08/1999
ISSN
0304-8853ID de publicación
- Scopus: 0032599210
Funding Details
The authors wish to thank the funding support received from the SPRI agency of the Basque Government to project CO97CP01.
FunderFunding number
Eusko Jaurlaritza
CO97CP01
Publication metrics
Métricas
SciVal
FWCI
0.68
SciVal
Número de autores
5
SciVal
Percentil de artículo
62
SciVal
citaciones
37
PlumX, se abre en una pestaña nueva
Número de citas
37
Capturas
28
